Should you have the tank in question, could you please do a napkin sketch of the tank (only) and provide dimensions. I believe the tank may come with a 98mm collar to adapt the tank to the motor tubing(?) Any help on this would be great!
98mm HyperTEK Dimensions Needed for 3500cc Tank
- Thread starter DRAGON64
- Start date
Help Support The Rocketry Forum:
Jeroen_at_CTI
Well-Known Member
- Joined
- Apr 26, 2009
- Messages
- 564
- Reaction score
- 4
All 98mm Hypertek tanks have a 4" long 98mm sleeve that starts 13-3/8" from the opening of the tank. The M3500 tank is 26.19" long.
Jeroen
Thank you Jeroen, can you tell me the dia of the tank itself?
bobkrech
Well-Known Member
- Joined
- Jan 20, 2009
- Messages
- 8,352
- Reaction score
- 55
It's 98 mm. https://www.hypertekhybrids.com/prodmseries.html
Check out https://www.hypertekhybrids.com/hypertek_motor_line_2001.pdf for a scale drawing.
Other information. https://www.hypertekhybrids.com/products.html
Bob
Last edited:
xenon
Well-Known Member
- Joined
- Jan 25, 2009
- Messages
- 701
- Reaction score
- 0
The 98mm tanks have a 4" long 98mm sleeve that starts 13-3/8" from the opening of the tank. The tank itself is slightly smaller in diameter
Thanks Bob, that 2001 Line up document had slipped my mind. I was able to use that doc and scale from the drawing to create what I needed.
Similar threads
