patelldp
Well-Known Member
- Joined
- Jan 23, 2009
- Messages
- 5,647
- Reaction score
- 100
I have for sale one built orange Rocketry Warehouse Lil' Rascal SE (https://rocketrywarehouse.com/product_info.php?products_id=614).
I will just not get around to flying this rocket, so it's off to a better home. Details about construction:
Bob Smith 30 minute epoxy used for all bonds and fin fillets. Fins have internal fillets to the MMT and external to the body.
U-Bolt installed in fore CR, 2x tee nuts in the rear CR. I will include screws for the motor retention, but no clips.
CR's have a thin layer of resin applied to protect from motor exhaust and ejection charges.
Rail buttons installed.
Nose cone has been weighted (4oz IIRC) and has provisions for electronics in the bulkhead. A 29mm tube has been installed to allow for a Raven 29mm av bay to be used. A 1/4-20 forged eyebolt is installed in the bulkhead. Bulkhead glued in place with RocketPoxy.
SOLD
I will just not get around to flying this rocket, so it's off to a better home. Details about construction:
Bob Smith 30 minute epoxy used for all bonds and fin fillets. Fins have internal fillets to the MMT and external to the body.
U-Bolt installed in fore CR, 2x tee nuts in the rear CR. I will include screws for the motor retention, but no clips.
CR's have a thin layer of resin applied to protect from motor exhaust and ejection charges.
Rail buttons installed.
Nose cone has been weighted (4oz IIRC) and has provisions for electronics in the bulkhead. A 29mm tube has been installed to allow for a Raven 29mm av bay to be used. A 1/4-20 forged eyebolt is installed in the bulkhead. Bulkhead glued in place with RocketPoxy.
SOLD
Last edited: