zeotherm
Well-Known Member
- Joined
- Nov 15, 2013
- Messages
- 62
- Reaction score
- 0
My daughter and I have been working on a Sirius Interrogator G together over the winter, and we're finally done the construction and are looking to finish it off. I am hoping I can get some good tips on things finishing related. I've never built a rocket that used plywood (as opposed to balsa) so I am wondering if using diluted wood filler works as well?
Also, the Interrogator has the "spine" for lack of a better term down its back. The dowel that I had was slightly warped (I should have gone and simply bought a straight one, but I went through with what was at hand that day) so it's left a bit of a larger gap on one side as opposed to the other. What would people recommend to fill this?
Thanks for any advice people can offer up
Also, the Interrogator has the "spine" for lack of a better term down its back. The dowel that I had was slightly warped (I should have gone and simply bought a straight one, but I went through with what was at hand that day) so it's left a bit of a larger gap on one side as opposed to the other. What would people recommend to fill this?
Thanks for any advice people can offer up