CTI Pro24 1G E75-17 - Minimum Delay?

The Rocketry Forum

Help Support The Rocketry Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

GregGleason

Well-Known Member
Joined
Nov 13, 2009
Messages
4,674
Reaction score
45
What is minimum delay that can be set for the CTI Pro24 1G E75-17?

Greg
 
I was told by a vendor that the max I could remove was 9 (thereby having an 8 second delay), but I have seen some documents that lead me to believe that the number is 4.

Greg
 
The certified minimum delay is -9 s. You could probably go safely to -5 s. Don't make it too short, as the remaining delay web thickness still needs to withstand the combustion pressure near burnout. Drill 0.040" per second.

Jeroen
 
The certified minimum delay is -9 s. You could probably go safely to -5 s. Don't make it too short, as the remaining delay web thickness still needs to withstand the combustion pressure near burnout. Drill 0.040" per second.

Jeroen

Thank you!

Greg
 
Back
Top