Devontmp thank you it is great to be here. Hoping to contribute to the community as best I can.
rocketgeek101 here is the basic drawing layout of parts:
scsager yeah it was an epic task but well worth it. I will write up a CNC post but that is a bit out of scope for this thread. But I do alot of custom work for anyone that needs stuff cut. Fabbug there are some pictures of the machine in there somewhere. But I make alot of robot/toys/rocket parts for myself too.
Here are some second flight pics:
Pilot Ready.
Pre-lauch Complete
Liftoff
Up...
Up...
And away!
Touchdown... recovery team in route.
Baffle system worked great... The recovery system seen no black stuff. :wink:
Motor mount in good condition. However I broke off a retaining fin removing it... Which is fine since that was it's last flight. Redesigned(Version 3) it to take an RMS29/40-120... tentative launch oct. 20th.
Faith V3 lifted off on Oct 20th with a perfect flight.
Now with a Aerotech RMS29/40-120 motor hardware and a G53-5FJ reload.
The new motor mount:
The Liftoff:
The parachute, so beautiful!
Very pleased with this design. Has a payload bay and baffles and retention all in one, that is all removable from the airframe. I found my mid power workhorse. It will get one more launch in November, then I am going to start working on my Level1 build, scheduled for liftoff in January.