- Joined
- Jan 16, 2011
- Messages
- 5,620
- Reaction score
- 1,088
Gary
What was the lift off weight for the F200? The N5600 sure did its job.
What was the lift off weight for the F200? The N5600 sure did its job.
NEW 8" FORMULA 200! From Rocketry Warehouse.
- Thread starter Blastcap Rocketry
- Start date
Help Support The Rocketry Forum:
- Joined
- Apr 22, 2013
- Messages
- 570
- Reaction score
- 139
Heard the LCO say 80 pounds.
JMZawodny
Well-Known Member
- Joined
- Feb 24, 2012
- Messages
- 915
- Reaction score
- 8
I put end-plates on the nose cone shoulder and made the shoulder/coupler removable. It is where the GPS telemetry, RF tracking and other electronic payloads go. The mid-airframe coupler has a 5" diameter interior tube so I can fit CTI Pro98 6XL motors. The altimeters are in the annular cylinder between the 5" tube and the 8"coupler. Two of the 3 centering rings for the motor mount are a stack of 1/8" G10, 1/2 plywood, and another 1/8 G10. The rail buttons screw into the plywood. The upper CR is also screwed to the airframe along with the usual epoxy. Weight without motor is 53 pounds.
Similar threads
