- Joined
- Apr 5, 2013
- Messages
- 1,545
- Reaction score
- 71
I have OpenRocket and was disappointed with the predicted delay I needed with a recent launch. It was off by a good 3-5 seconds. If i used the same file in Rocksim would I have had the same issue or are their algorithms/results pretty much the same? (Is one more accurate than the other?)
(Unless I used the CTI delay tool wrong! I used a motor that said 12. I wanted 9 so I set it to -3 to drill out the delay. The delay looks like it was 1/2" wide and the bit is only 1/4".)
(Unless I used the CTI delay tool wrong! I used a motor that said 12. I wanted 9 so I set it to -3 to drill out the delay. The delay looks like it was 1/2" wide and the bit is only 1/4".)
Last edited: