Hobbylinc (Lack of SU composite motors) 24mm

[AfterBurners]

Is it me or am I imagining things. I wanted to pick up some SU 24mm composite motors and found that there wasn't much to chose from. I would have bought reloads, but I don't have the hardware for a 24mm only 29mm

http://www.hobbylinc.com/f_model_rocket_engines

I ended up buying a couple F32T-8's and of course some black powder, but I always thought they had a wider selection of SU motors? In fact I can't even find the motors I used in ROCKSIM for the flight simulations. So now I'm trying something I'm unsure, just picked something with the same delay...hope it works?

[JPVegh]

I don't know what you were looking for but hobbylinc has the bad habit of mixing SUs and reloadables on the website. They do have E20s and E30s in stock though.

[Handeman]

I would have bought reloads, but I don't have the hardware for a 24mm only 29mm

You could always order this too http://www.hobbylinc.com/htm/aro/aro91241.htm

[cavecentral]

I don't know what you were looking for but hobbylinc has the bad habit of mixing SUs and reloadables on the website. They do have E20s and E30s in stock though.

+ 1 - just filter by aerotech

[JPVegh]

+ 1 - just filter by aerotech

Yep that's a good way of doing it but the E30s they have in stock are Estes.

[cavecentral]

Yep that's a good way of doing it but the E30s they have in stock are Estes.

Dang these new fangled motors confusing me.

[aditat2]

I wonder if they are having problems with the motors themselves - especially after reading one of the other posts about having problems with the SU's cato-ing. May be that they are recieving complaints about the motors and so are waiting to see if Estes fixes the problems before they re-stock them. I know that the Hobby Lobby near me has had some complaints about them.

[AfterBurners]

I don't know what you were looking for but hobbylinc has the bad habit of mixing SUs and reloadables on the website. They do have E20s and E30s in stock though.

Yea I just noticed that. Went back on the site. I figure I'll pick some up next time, but most of the ones they have are 29mm, which is fine because I have the hardware for that.

thanks