Hi all, maybe this will be helpful to others.

I got 48 of the long Q2G2 ignitors and measured all of them for resistance. All were close to 3 ohms. Lowest I saw was 2.1 ohms and highest was 3.9 ohms.

None were shorted or open, all 48 measured well.

I used a good Fluke with extremely short leads to minimize resistance external to the ignitors.

As a point of comparison I measured a few (4 or 5) Estes ignitors. They were much lower in resistance; in the 0.7 to 0.9 ohm range.

Hope this helps...