nose cose

[GuitarRockets]

http://www.ncphobbies.com/nosecones-...kets/cus21012/

Anyone every order one of these nose cones? The drawing really does not offer any real information.

[JStarStar]

Hmmm. Custom Rockets does make an egg-sized nose cone with their Elite egglofter kit, but it fits BT-20, not BT-60, body tubes.

I haven't seen Custom with a BT-60 size egg cone but that doesn't mean they may not make one.

I would e-mail the seller to find out for sure. The drawing does not really look like an egg cone.

[JPVegh]

It looks like a Custom PC-60.

http://www.customrocketcompany.com/store/

[JStarStar]

BT-60 is 1.637" or 41mm in diameter. Most Grade A eggs are slightly larger, so a standard BT-60 body tube or nose cone will usually not hold an egg, if that is what you want the rocket to do.

If you don't care about egg lofting and just want a BT-60 cone, it looks like a decent one.

[JPVegh]

Actually after looking a little closer that is a picture of the Custom PC-55.

http://www.customrocketcompany.com/store/

I think that web site has their descriptions and pics mixed up. I'd be careful ordering from there, you don't know what you'll get