? 23 Av-bay
First insert the RRC2 from end marked J2 so battery goes in last. It's a tight fit and the tube will compress the battery clip "locking" it in. Pushing it in from other end battery first is very difficult.
Tie rods going over & under board. [that's why the straw on rods for insulation]
The power wire goes through second hole [marked for power] next to charge wire hole. I used .6-.75 bp for apogee and .75- .85 for main. depends on how tight you pack stuff. I used a 24 in chute and 15 ft shock cord on each end. I sent you a 15 ft Kevlar cord that I use. Don't have the other one. Drogueless.
You should see the terminal block through the square hole.
Insert coupler with altimeter into av-bay
Line up rivet holes and insert all 3. use short ones so they don't hit battery or board.
Last edited by blackjack2564; 10th February 2012 at 02:54 AM.
Jim Hendricksen
L-3 Tripoli 9693 Tap
ICBM Orangeburg SC
QCRS Princeton ILL
MDRA Price Maryland
Woosh Bong Wisconsin
"Made" member of Chicago Rocket Mafia
Rocketry...........an exact science.......but not exactly !!!