Aris
Well-Known Member
- Joined
- Nov 26, 2011
- Messages
- 127
- Reaction score
- 0
Im launching tommorow a dual deploy thumperjr and am going to finish up the electronics setup today after school. I just wanted to make sure about everything. I am going to hook up the altimeter (stratologger) is connect the battery and solder 2 more wires of differing color to the switch. The switch is one that is turned by a flathead screwdriver. It whas four prongs sticking out of the bottom and the numbers 110 and 220 on top. Then I am using Ez canisters which I will connect directly to the altimeter and plug the hole in the bulkhead with some blue putty. Anything I should do differently and why?