Great. Now to order a magnetic switch from Adrian and then learn how to solder the wires to it :confused2: Thanks to his forum on the Featherweight site, I already know how to wire in the switch to the RRC2 (I think). The RRC2 has a battery + and - terminal block and then another terminal block for the switch. I hooked up the battery and found out which terminal on the switch block is powered when the battery is installed. Should be fairly straight forward.
Adrian (the other one with a very blue collar)
You can also just use 4-40 machine screws to connect wires to the magnetic switch. Put the screw in, wrap the wire around it, and tighten it down, similar to light switches and outlets with house wiring.
Edit: Just to be clear, this wiring discussion is applicable to the Featherweight magnetic switch. The Power Perch doesn't require any wiring other than connecting the deployment charges to the screw terminals.
Last edited: