FlisKits - Bulls Eye (SP024) Gallery

The Rocketry Forum

Help Support The Rocketry Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

mcderek

Free Flight Rocketeer
Joined
Feb 23, 2009
Messages
621
Reaction score
161
Location
Moscow, ID
A FlisKit Bulls Eye with a numerical theme. Fun kit to build. First flight is planned for the weekend.

001 (406x800).jpg
 
Last edited by a moderator:
Welcome to the FlisKits Bulls Eye (SP024) Gallery on TRF.

This gallery showcases the FlisKits Bulls Eye (SP024) and those rockets derived from it. Particularly appropriate in this thread are the following:


FlisKits: Bulls Eye: SP024



as well as any upscales, downscales, clones, kitbashes or other derivative works. Even Goonies qualify!



 
Last edited:
FlisKits Bulls Eye (SP024) Basic Information.

fliskits.gif
FlisKits

MODEL NAME: Also known as:

NUMBER: SP024

Introduced: 2010
Final Year:
Designer: Jim Flis

Type: Sport, Ringfin
Motor Mount: 1x18mm
Recovery: Parachute
Stages: 1
Length: 13.23"
Diameter: 2.217"
Span: 5.62"
Weight: 2.5 oz.

Mfg. Description: The Bull's Eye features a short, fat design with laser cut fins, large tail ring and a large peel-n-stick vinyl sticker! (FlisKits 2011 Catalog)

=====

FlisKits wanted to add some more fun to our selection of beginner kits, and the Bull's Eye was the answer!

One of the problems with beginner kits is that very easy construction tends to lead to a very simple looking model as a result. The Bull's Eye is anything BUT simple looking! NINE fins, large tail ring, fat and stubby. This model hits the mark as a sharp looking model but is STILL a breeze to assemble!

A bit pricier than you may have expected, but you get a LOT of rocket for the price! Large diameter (2.217") with laser cut fins, a large tail ring and a decorative logo sticker!

The key to the easy assembly is that the flat bottom fins and tail ring are all situated such that they are flat (even) with the bottom of the main body tube. Therefore, you can stand the model up on the assembly jig (provided) and all of the parts just slide up to the model and will stand on their own as the glue dries. The assembly jig even eliminates the need for marking off fin locations and drawing lines on the tube.

Perfect for the beginner and the advanced rocketeer alike! This model is also perfectly suited for conversion to 24mm flight, for the more advanced rocketeers by purchasing the EMK-24-70 engine mount kit or you could even consider a cluster modification. Just be sure to add adequate nose weight, as needed, to counter the extra weight of the larger motors and clusters.

The Bull's Eye is a fun rocket to build and fly and is sure to become a favorite of any fleet!

Also, the Bull's Eye is perfect for the classroom looking for something different to build and fly. The unique look of this model will make it the pride of any beginner and a classroom favorite! (Fliskits 2013 Web Ad)


Advertising Liveries

fliskits-bulls%20eye%20sp024-2011%20cat.jpg
2011 Catalog

fliskits-bulls%20eye%20sp024-2010%20web.jpg
2010 Web Ad
fliskits-bulls%20eye%20sp024-2013%20web.jpg
2013 Web Ad

Face Card(s)

fliskits-bulls%20eye%20sp024-face%201.jpg


Instruction Header(s)





First post in this thread featuring this rocket.

See Also:
TRF Build Threads

TRF Applicable Threads

LINKS
EMRR
RocketReviews
Mfg. Page


If you have any additional information on this rocket and/or catalog photos please let us know.
 
Last edited:
Back
Top