Edmonds - Ecee Gallery

[JAL3]

Welcome to the Edmonds - Ecee Gallery on TRF.

This gallery showcases the Edmonds - Ecee and those rockets derived from it. Particularly appropriate in this thread are the following:


Edmonds: Ecee:
McCoy's Micro Wonder Works: Micro Ecee Rocket Glider: #300



as well as any upscales, downscales, clones, kitbashes or other derivative works. Even Goonies qualify!

[JAL3]

Edmonds Ecee Basic Information.

Edmonds Aerospace

MODEL NAME: Ecee

NUMBER:

Introduced:
Final Year:
Designer: Robert Edmonds

Type: Rocket Glider
Motor Mount: 1x13mm
Recovery: Glide
Stages: 1
Length:
Diameter:
Span: 13.5"
Weight:

Mfg. Description: The Ecee series models give you a sophisticated ride. Ecee gives you a quick introduction to the world of Rocket Glide (R/G) where the model climbs aloft and descends as a single unit. The Ecee uses the Edmonds Canard system for boost, in which the elevator surface on the canard is left to move freely for flight under thrust and coast, but then locked down into position for glide. The regular Ecee uses mini engine power and can be flown on almost any field. (Edmonds 2011 Web Ad)

Advertising Liveries

Edmonds 2011 Web Ad

Face Card

[img][/img]



First post in this thread featuring this rocket.

See Also: LINKS
EMRR
RocketReviews
Mfg. Page


If you have any additional information on this rocket and/or catalog photos please let us know.

[JAL3]

MMWW (Edmonds) Micro Ecee Rocket Glider (#300) Basic Information.

McCoy's Micro Wonder Works (MMWW)

MODEL NAME: Micro Ecee Rocket Glider

NUMBER: #300

Introduced: 2004
Final Year:
Designer: Robert Edmonds, John McCoy

Type: Rocket Glider, Downscale
Motor Mount: 1x6mm
Recovery: Glide
Stages: 1
Length:
Diameter:
Span:
Weight:

Mfg. Description: 2.6 Downscale (Plan)

Advertising Liveries

Plan

Face Card

First post in this thread featuring this rocket.

See Also: LINKS
EMRR
RocketReviews
Mfg. Page


If you have any additional information on this rocket and/or catalog photos please let us know.

[Micromeister]

Having Robert Edmonds as a club member has given us a lot of very FUN flying Glider creations.
One of my favorite designs was the Ecee-18 an 18mm motor RG with forward canard and huge rear wing/tail assembly. the Box design airframe houses the canard lockdown making a very sleek looking glider.
I just had to try downscaling this desing as have been very pleased with it's flight performance. No it is not a contest winner by any means but it's fun to fly, almost always doest a complete loop just before ejection giving a varing glide length depending on where it transitions into glide mode. at 6.3g or 7.4g lowt it's not at all hard to get some very nice flights out of this model provided the breeze is down that day.

Post Copied with permission

.