nosecone
Well-Known Member
- Joined
- May 6, 2010
- Messages
- 282
- Reaction score
- 307
Didn't see a gallery for this one so I thought I'd start.
For the checkerboard I used the classic Damon Era Big Bertha decal from Excelsior Rocketry, and cut it into equal lengths with a razor blade. Then I applied the seperate decals in a staggard fashion.
FEATURES: Designed to fly off the Estes C11 engine, and will also fly on Estes D-series engines.
Flies up to 900 feet (274m) depending on chosen engine.
18" parachute recovery.
White cardboard body tubes.
White plastic nose cone.
Self-adhesive decals.
Estes' full 1 year warranty.
Detailed illustrated assembly and launch instructions.
Recommended Engines: C11-3, D12-5
SPECS: Length: 30.25" (76.8cm)
Diameter: 1.64" (41.6mm)
Weight: 2.9 oz. (80.8g)
For the checkerboard I used the classic Damon Era Big Bertha decal from Excelsior Rocketry, and cut it into equal lengths with a razor blade. Then I applied the seperate decals in a staggard fashion.
FEATURES: Designed to fly off the Estes C11 engine, and will also fly on Estes D-series engines.
Flies up to 900 feet (274m) depending on chosen engine.
18" parachute recovery.
White cardboard body tubes.
White plastic nose cone.
Self-adhesive decals.
Estes' full 1 year warranty.
Detailed illustrated assembly and launch instructions.
Recommended Engines: C11-3, D12-5
SPECS: Length: 30.25" (76.8cm)
Diameter: 1.64" (41.6mm)
Weight: 2.9 oz. (80.8g)
Last edited: