CoyoteNumber2
Original San Diego High Power Rocketry
- Joined
- Jan 30, 2009
- Messages
- 1,027
- Reaction score
- 463
I have a few rocket and rocketry-related items to give away. Most of this stuff has little-to-no value, but I would rather not put it all in the trash if someone else can make use of it.
Your only cost is postage. Please private message if interested.
Update 5/24: Only the ABS couplers remain. I will bring them to ROCstock.
1. US Rockets Stiletto partial kit. I started building this years ago and then tore it apart for some reason. Condition is rough; only what's pictured is included. Gone
2. Hot Rod Rockets Fruit Fly model rocket kit. Gone
3. Edmonds Aerospace Ivee boost glider kit. Completeness is unknown. Gone
4. Four-inch fin can with 54mm motor mount. Airframe is fiberglass laminated. Gone
5. Set of three thread-together airframe couplers. These are machined from ABS pipe fittings. They will fit inside a 4" airframe and fit a 3" motor tube internally. $13.56 to mail. Gone
6. Electronics enclosure intended for a launch controller. Dimensions are approximately 7" by 10". Gone
Your only cost is postage. Please private message if interested.
Update 5/24: Only the ABS couplers remain. I will bring them to ROCstock.
1. US Rockets Stiletto partial kit. I started building this years ago and then tore it apart for some reason. Condition is rough; only what's pictured is included. Gone
2. Hot Rod Rockets Fruit Fly model rocket kit. Gone
3. Edmonds Aerospace Ivee boost glider kit. Completeness is unknown. Gone
4. Four-inch fin can with 54mm motor mount. Airframe is fiberglass laminated. Gone
5. Set of three thread-together airframe couplers. These are machined from ABS pipe fittings. They will fit inside a 4" airframe and fit a 3" motor tube internally. $13.56 to mail. Gone
6. Electronics enclosure intended for a launch controller. Dimensions are approximately 7" by 10". Gone