ManOntheMoon
Active Member
- Joined
- Dec 29, 2014
- Messages
- 34
- Reaction score
- 0
For balsa fins reinforced with carbon, is one layer of 3K fabric enough for high-power, or would you recommend more layers? Here are the specifications for the fabric:
50" 3K Carbon Plain Weave
Hexcel AS4 (12.6x12.6 weaves/in)
Thickness Weight Width Tracers Fiber
0.009" 0.23mm 5.9oz/200gsm 50in, 127cm None AS4 640Ksi 33.5Msi
50" 3K Carbon Plain Weave
Hexcel AS4 (12.6x12.6 weaves/in)
Thickness Weight Width Tracers Fiber
0.009" 0.23mm 5.9oz/200gsm 50in, 127cm None AS4 640Ksi 33.5Msi