- Joined
- Jan 1, 2017
- Messages
- 18
- Reaction score
- 2
Last weekend I launched a Madcow Arcas (2.6" thin wall fiberglass) with a custom Nike Booster. I used a Aerotech DMS H550 on the first stage and a H100 on the upper stage. The Nike Booster looked great and the separation was clean (pyro-A), but the booster never fired. The igniter (Pyro-B) maintained continuity (voltage) through drogue deploy when the separation cut the wires to Pyro A and B. It doesn't appear I exceeded the tilt limit on the flight and my goal was booster separation 1.5 sec after motor burnout and ignition 1 second after booster separation (2.5 seconds after booster burn-out.
Can anyone tell me what I did wrong?
Attached its the eeprom data, and a screen shot of the settings. The CSV is too large to attach.
Gordon
Pflugerville, TX
View attachment 2018-03-03-serial-3477-flight-0003.eeprom
Can anyone tell me what I did wrong?
Attached its the eeprom data, and a screen shot of the settings. The CSV is too large to attach.
Gordon
Pflugerville, TX
View attachment 2018-03-03-serial-3477-flight-0003.eeprom