Screaminhelo
Shade Tree Rocket Surgeon
- Joined
- Jan 30, 2013
- Messages
- 935
- Reaction score
- 4
So my head wasn't on straight the first time, so I figured that I would re-start the build thread with an accurate title. Rather than being an upscale, this build will be a 24mm build of the Sizzler.
I'll try to do a decent job of documenting the build as I go but don't expect anything on my bench to get built fast.
Thanks already to K-Tesh for catching a couple of errors already, hence the corrected thread title. He also pointed out that the NC should be a PNC-60RL. I haven't updated the OR file yet.
The .ork file is attached and all comments are welcome.
I am looking at adjusting the length of the inner tube and/or the motor tube but it seems like a good idea to leave the inner tube as is for strength on landing.
Estes Sizzler (2127)_MOD60v1.ork
I'll try to do a decent job of documenting the build as I go but don't expect anything on my bench to get built fast.
Thanks already to K-Tesh for catching a couple of errors already, hence the corrected thread title. He also pointed out that the NC should be a PNC-60RL. I haven't updated the OR file yet.
The .ork file is attached and all comments are welcome.
I am looking at adjusting the length of the inner tube and/or the motor tube but it seems like a good idea to leave the inner tube as is for strength on landing.
Estes Sizzler (2127)_MOD60v1.ork