Limited Big Nuke with 98mmt!

The Rocketry Forum

Help Support The Rocketry Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

LOC

Well-Known Member
TRF Sponsor
TRF Supporter
Joined
Nov 22, 2016
Messages
187
Reaction score
92
At 89" tall, incorporating some special components and all set up for dual deployment, this is one of the LOC-CUSTOM SERIES of kits. Which feature factory pre-slotted airframe and through-the-wall fin construction and high power motor capabilities, the Big Nuke-4 is the perfect upgrade to our hot selling Big Nuke kit. This version trades the 54mm motor mount for raw 98mm motor power. We included our popular EB-5.38 short electronics bay which allows more room for recovery with some extras. An additional Tubular Nylon shock cord and an 18" drogue parachute. We also upgraded the recovery harness with U-bolts and 1 inch tubular with loops sewn in. Rail buttons and a 78" main parachute. This rocket is for the serious high power flyer!

https://www.locprecision.com/product/big-nuke-4/
 
Without glassing the fins, what do you recommend for impulse range? Definitely a nice rocket
 
I certainly wouldn't worry from a flutter standpoint. Unless you're referring to heat build up at supersonic speeds. Then use the necessary means to make certain you don't melt anything. It's hard to recommend a certain range as this kit will be dependent on the individuals building skills. That said, J-L should be comfortable for most. Going to M or N range will require some decent heat protection.

I hope that helps!
 
Back
Top