Loki Research
Motor Manufacturer
- Joined
- Aug 20, 2011
- Messages
- 1,409
- Reaction score
- 596
I know there's been several people waiting to see this for a very long time now.
I am seriously thinking about placing an order for 98mm DOM tubing to make snap ring style hardware from. For a long time I have wanted to do 98mm hardware but I'm only willing to do it with DOM tubing to keep in line with the high tolerance and high quality of products that Loki Research has become known for in recent years. There has been a lot of interest in this lately and I have fielded plenty of emails on the subject in the past 6+ months. I have enough customers standing in line now to help cover a large enough portion of material purchasing costs so I think now could very well be the time. For now, these would solely be for experimental use.
If you have a serious interest in purchasing this hardware, please send me an email with the average case lengths you are wanting along with the quantity. Grain lengths would be ~6" long each. The bulkheads would be scaled up from 76mm with much larger smoke grain cavities and they would use the same high quality Iso-molded graphite nozzles used in the rest of the Loki product line. Tentatively, the case ID/OD dimensions would be ~3.55"ID x ~3.875"OD with IR (individual reading) tolerances and of custom lengths, not modeled after anyone else. Lengths would range from 24" to 69~78" in length. Liner wall thicknesses would be around .093" and casting tube ID would be 3.225" for now. The longer cases would (for myself) only be used with single use composite nozzles.
scott *at* lokiresearch ^dot^ com. Yeah I get enough junk mail as it is. No PM's please as I rarely check them and I like to keep all communications on business in one place.
If you know of someone who might be interested that doesn't come around here much, please send them a link to come here.
Thanks
I am seriously thinking about placing an order for 98mm DOM tubing to make snap ring style hardware from. For a long time I have wanted to do 98mm hardware but I'm only willing to do it with DOM tubing to keep in line with the high tolerance and high quality of products that Loki Research has become known for in recent years. There has been a lot of interest in this lately and I have fielded plenty of emails on the subject in the past 6+ months. I have enough customers standing in line now to help cover a large enough portion of material purchasing costs so I think now could very well be the time. For now, these would solely be for experimental use.
If you have a serious interest in purchasing this hardware, please send me an email with the average case lengths you are wanting along with the quantity. Grain lengths would be ~6" long each. The bulkheads would be scaled up from 76mm with much larger smoke grain cavities and they would use the same high quality Iso-molded graphite nozzles used in the rest of the Loki product line. Tentatively, the case ID/OD dimensions would be ~3.55"ID x ~3.875"OD with IR (individual reading) tolerances and of custom lengths, not modeled after anyone else. Lengths would range from 24" to 69~78" in length. Liner wall thicknesses would be around .093" and casting tube ID would be 3.225" for now. The longer cases would (for myself) only be used with single use composite nozzles.
scott *at* lokiresearch ^dot^ com. Yeah I get enough junk mail as it is. No PM's please as I rarely check them and I like to keep all communications on business in one place.
If you know of someone who might be interested that doesn't come around here much, please send them a link to come here.
Thanks