EXPjawa
Well-Known Member
I am looking at a project that will need a segment of the old Semroc LT-275 tube, which itself I believe stems from Centuri heavier-duty tube. eRockets.biz sells the tube in 8, 22, & 30" segments. Of course, the design needs 36", so I'll need to splice a couple segments together. Not a big deal, but the only coupler I can find is a solid balsa piece. That won't work, because the spliced joint is about 6" above the motor tube and 20" below the body separation.
What all that means is that I'd like to find a typical tubular tube coupler for LT-275. If I have to resort to making one by sectioning an extra piece of 275, I will, but I'd rather buy one that fits properly off the bat. Does anyone have any leads on a source? eRockets doesn't show one, BMS doesn't dabble in Centuri sizes.
Thanks
What all that means is that I'd like to find a typical tubular tube coupler for LT-275. If I have to resort to making one by sectioning an extra piece of 275, I will, but I'd rather buy one that fits properly off the bat. Does anyone have any leads on a source? eRockets doesn't show one, BMS doesn't dabble in Centuri sizes.
Thanks