Coast time setting for staging in Openrocket?

The Rocketry Forum

Help Support The Rocketry Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Winston

Lorenzo von Matterhorn
Joined
Jan 31, 2009
Messages
9,560
Reaction score
1,748
Is there one? I've been using ejection delays
 
If you go under Motors and Configurations and then select the motors tab. You can set the ignition by selecting the motor and then use the Select Ignition button. You can then set the ignition from burnout and then any number of seconds. You can also separate the booster by going under the Stage tab, selcting the motor and then using the Select Separate button to separate the booster.
 
If you go under Motors and Configurations and then select the motors tab. You can set the ignition by selecting the motor and then use the Select Ignition button. You can then set the ignition from burnout and then any number of seconds. You can also separate the booster by going under the Stage tab, selcting the motor and then using the Select Separate button to separate the booster.
Thanks!
 
Back
Top