Help Support RocketryForum by donating using the link above or becoming a Supporting Member.


Results 1 to 17 of 17
  1. #1
    Join Date
    27th March 2013
    Location
    Has Changed
    Posts
    9,552

    Need a small favor (small length of Plastruct 1/16" Green Fluorescent Rod)

    Due to a bad turn of events, I lost my bike's handlebar light (the one I used in the video)



    That light is critical to my personal safety riding at night in China. I've bought a replacement...

    However, that fluorescent rod I used for it is something I can't find in China.

    Does anyone have a scrap (say 2") of the green 1/16" diameter Plastruct Fluorescent rod that they could send me?

    PM for address.

    Thanks
    Jim

    Dreaming of making the rockets I dreamed of as a kid (and then some).


    NAR L1 Cert flight: Sheridan, Oregon, USA. Sept. 19, 2015. Flew Deep Space OFFl on an I357T-14A Blue Thunder

  2. #2
    Join Date
    21st January 2009
    Location
    Glendale, Arizona
    Posts
    1,804
    I don't have any however........
    https://www.amazon.com/s/?ie=UTF8&ke...cmt4jdi4_e_p20


  3. #3
    Join Date
    11th January 2013
    Location
    Old Bridge,,,,,,,,,,,,, New Jersey
    Posts
    5,196
    I don't have the rod,,
    but I'll ship to ya if that helps..

    Teddy




    www.Onebadhawk.com

    Ted Chernok
    Old Bridge New Jersey
    METRA- BoD- New York..
    URRG- Way upstate New York..
    MDRA- Maryland..
    QCRS- Illinois- Best politicians money can buy ( Tim L. )..
    Kloudbusters- Kansas..
    NAR # 87063
    Tripoli # 14443
    Level 3

  4. #4
    Join Date
    27th March 2013
    Location
    Has Changed
    Posts
    9,552
    Quote Originally Posted by Onebadhawk View Post
    I don't have the rod,,
    but I'll ship to ya if that helps..

    Teddy
    Does anybody have a length of rod they'd be willing to send to Teddy?

    I priced it on ebay, and the posted cost of shipping is nuts for something so small and light.

    MClark, thanks for the suggestion, but that's even more expensive than the Plastruct stuff.
    Dreaming of making the rockets I dreamed of as a kid (and then some).


    NAR L1 Cert flight: Sheridan, Oregon, USA. Sept. 19, 2015. Flew Deep Space OFFl on an I357T-14A Blue Thunder

  5. #5
    Join Date
    23rd July 2011
    Location
    Butte, MT
    Posts
    2,260
    I donít have Plastruct, but I might have a chunk of fluorescent green or yellow string trimmer line. Could you make that work?


    Steve Shannon
    Steve Shannon
    L3CC, TAP, Director, Tripoli Rocketry Association

  6. #6
    Join Date
    27th March 2013
    Location
    Has Changed
    Posts
    9,552
    Quote Originally Posted by Steve Shannon View Post
    I don’t have Plastruct, but I might have a chunk of fluorescent green or yellow string trimmer line. Could you make that work?


    Steve Shannon
    Thanks!

    That might work...

    Could you perhaps do a test using the line like I did in the video? I'd also need to know the diameter of the line.
    Dreaming of making the rockets I dreamed of as a kid (and then some).


    NAR L1 Cert flight: Sheridan, Oregon, USA. Sept. 19, 2015. Flew Deep Space OFFl on an I357T-14A Blue Thunder

  7. #7
    Join Date
    23rd July 2011
    Location
    Butte, MT
    Posts
    2,260

    Need a small favor (small length of Plastruct 1/16" Green Fluorescent Rod)

    Quote Originally Posted by K'Tesh View Post
    Thanks!

    That might work...

    Could you perhaps do a test using the line like I did in the video? I'd also need to know the diameter of the line.
    Iíll try. It was in a bunch of stuff I just moved out of my garage so itíll take a couple days to find it. As I recall itís probably about 3/32 inch and a translucent (cloudy) green.


    Steve Shannon
    Last edited by Steve Shannon; 4th December 2017 at 05:01 PM.
    Steve Shannon
    L3CC, TAP, Director, Tripoli Rocketry Association

  8. #8
    Join Date
    11th January 2013
    Location
    Old Bridge,,,,,,,,,,,,, New Jersey
    Posts
    5,196
    Quote Originally Posted by K'Tesh View Post
    Does anybody have a length of rod they'd be willing to send to Teddy?

    I priced it on ebay, and the posted cost of shipping is nuts for something so small and light.

    MClark, thanks for the suggestion, but that's even more expensive than the Plastruct stuff.
    How much was the shipping cost from the ebay site ??
    If the site is doing the shipping calculations ( and has the correct information to work with ) it's usually fairly accurate..
    The ebay site may be your best bet, I don't think it would be any less expensive for you if I did the shipping..

    Teddy




    www.Onebadhawk.com

    Ted Chernok
    Old Bridge New Jersey
    METRA- BoD- New York..
    URRG- Way upstate New York..
    MDRA- Maryland..
    QCRS- Illinois- Best politicians money can buy ( Tim L. )..
    Kloudbusters- Kansas..
    NAR # 87063
    Tripoli # 14443
    Level 3

  9. #9
    Join Date
    13th June 2014
    Location
    Cocoa Beach, FL
    Posts
    3,550
    dude, do they fish in China? Go to bait/tackle store & buy some mono filament. Or even weed wacker line. Be creative!
    Tim
    L3 NAR 98225

  10. #10
    Join Date
    27th March 2013
    Location
    Has Changed
    Posts
    9,552
    Quote Originally Posted by Steve Shannon View Post
    I’ll try. It was in a bunch of stuff I just moved out of my garage so it’ll take a couple days to find it. As I recall it’s probably about 3/32 inch and a translucent (cloudy) green.
    Thanks! 3/32" likely would work... not much bigger though.

    Quote Originally Posted by Onebadhawk View Post
    How much was the shipping cost from the ebay site ??
    If the site is doing the shipping calculations ( and has the correct information to work with ) it's usually fairly accurate..
    The ebay site may be your best bet, I don't think it would be any less expensive for you if I did the shipping..

    Teddy

    Shipping for a pack that costs $6.53 is $3... If I were to try to combine shipping and get a pack of each color the cost is >$24.

    But I only need a couple of inches. The packs are only sold in packs of ten 10 inch long rods. A short length taped to a piece of paper and mailed like a standard letter would likely cost a lot less.

    Quote Originally Posted by timbucktoo View Post
    dude, do they fish in China? Go to bait/tackle store & buy some mono filament. Or even weed wacker line. Be creative!
    Do they fish? Yes.... However, I don't. I'd never thought to check there. I'll see if I can find one. Weed wackers? People here don't live in suburbs... They live in either high rises (like I do (31 floors) or older, shorter apartment buildings (4-6 stories). A few live in Hutong neighborhoods, but none of these areas feature grass, it's a very urban area. There is also nothing like a Home Depot around here, and Walmart closed a year and a half ago.
    Dreaming of making the rockets I dreamed of as a kid (and then some).


    NAR L1 Cert flight: Sheridan, Oregon, USA. Sept. 19, 2015. Flew Deep Space OFFl on an I357T-14A Blue Thunder

  11. #11
    Join Date
    23rd July 2011
    Location
    Butte, MT
    Posts
    2,260
    If I can find the string trimmer line (I checked the shop; itís not there. Next stop storage unit) and if it works as a bit of a light guide, and if itís not too large, Iíll just put it into a padded envelope and mail it with an international postage stamp to you. If all the conditions are met Iíll request your mail address.


    Steve Shannon
    Steve Shannon
    L3CC, TAP, Director, Tripoli Rocketry Association

  12. #12
    Join Date
    23rd July 2011
    Location
    Butte, MT
    Posts
    2,260
    Hereís what I found. Itís not very translucent. I donít think it would work. Click image for larger version. 

Name:	IMG_0001.jpg 
Views:	26 
Size:	158.0 KB 
ID:	333571
    Steve Shannon
    L3CC, TAP, Director, Tripoli Rocketry Association

  13. #13
    Join Date
    27th March 2013
    Location
    Has Changed
    Posts
    9,552
    Quote Originally Posted by timbucktoo View Post
    dude, do they fish in China? Go to bait/tackle store & buy some mono filament. Or even weed wacker line. Be creative!
    Thanks for the suggestion!

    I finally found a place that sells fishing supplies. I didn't have to look for monofilament line that would fit the bill because I found short lengths of line wrapped around fluorescent plastic packaging including a small plastic nub that would fit the bill. I found one of the leaders had been lost (or stolen) but the packaging was left behind. I asked a clerk if I could have it, and was told yes. If I had to buy one... it would have cost me a whopping 6 RMB (slightly less than a buck).

    While it's not 1/16" OD, It was pretty close, and I did have a drill bit that worked. It only had one tab (the other was broken). I'm hoping that I'll be able to do "stretched sprue" to make one for the new light (once it arrives). Still, I'm back in business with one of my lights.

    One of the lessons learned. Do the mod ASAP with new lights. Another lesson... Don't lose valuable, hard to replace, lights in the first place.
    Dreaming of making the rockets I dreamed of as a kid (and then some).


    NAR L1 Cert flight: Sheridan, Oregon, USA. Sept. 19, 2015. Flew Deep Space OFFl on an I357T-14A Blue Thunder

  14. #14
    Join Date
    24th December 2017
    Location
    Converse IN
    Posts
    5
    Not sure if y’all have any gun shops in China (don’t know your countries laws) but you can grab a piece of fiber optic that we use in gun sites for a little of nothing. They measure out at .058 inches or 1.45mm and are very bright.

  15. #15
    Join Date
    27th March 2013
    Location
    Has Changed
    Posts
    9,552
    Quote Originally Posted by IndianaSteve View Post
    Not sure if y’all have any gun shops in China (don’t know your countries laws) but you can grab a piece of fiber optic that we use in gun sites for a little of nothing. They measure out at .058 inches or 1.45mm and are very bright.
    Nope... No gun shops here. I see guns occasionally held by armored car personnel, but they're not something that every Tom, Dick, or Harry can get. And, with the fishing supplies I found I'm set unless (God Forbid) I lose another one.
    Dreaming of making the rockets I dreamed of as a kid (and then some).


    NAR L1 Cert flight: Sheridan, Oregon, USA. Sept. 19, 2015. Flew Deep Space OFFl on an I357T-14A Blue Thunder

  16. #16
    Join Date
    3rd February 2010
    Posts
    121
    China does have a huge amount of Airsoft products and likely the gun sites mentioned above to go with it.

    What exactly does the fluorescent rod do though? I use a lot of the cree LED bike lights for mountain biking at night, but can't see a little dot being particularly visible to cars.

  17. #17
    Join Date
    27th March 2013
    Location
    Has Changed
    Posts
    9,552
    Quote Originally Posted by kclo4 View Post
    China does have a huge amount of Airsoft products and likely the gun sites mentioned above to go with it.

    What exactly does the fluorescent rod do though? I use a lot of the cree LED bike lights for mountain biking at night, but can't see a little dot being particularly visible to cars.
    Airsoft they do have... However, I didn't know of those products for real guns, as I'm not into guns (or seriously into airsoft anymore for that matter). Besides, I've now found what I needed. So, I'm good.

    The rod lets me know that the CREE LED that is illuminating the road is working without having to let go of the handlebars/brakes and put a hand in front of it. When it's wet and dark out, sometimes you can't tell if your light is really on. I've had Niterider indicator lights that showed that the light was charged and working. However, the actual headlight (typically a Halogen light (and in one case a LED light)) wasn't, and I couldn't tell because of the wet conditions. I was a Niterider fan for years but now I'm sold on Cygolite's Expilion 850 light. Niterider's lights were good, much better than cheaper lights such as CatEye and Bell, but I seemed to be sending them in for repairs way too often.

    The Cygolite's biggest draw is the end user swappable internal battery. When NiteRider's batteries would die (as in not take a charge anymore), it was cheaper to just replace the whole unit with another system than replace it (and technology was advancing considerably with brighter and brighter lights that had longer run times). The last straw was when my Cordless Minewt 600's battery died, and I couldn't replace the battery for less than a replacement. The electronics were good, and the light was bright, but blowing that amount of cash just to buy a battery was insane. Another advantage with the Expilion was that if the light went flat (and I had purchased a replacement battery stick) I could swap it out in the field and keep going. I never did buy the extra battery though. Now I might. I'll add that none of my NR lights lasted for more than a couple of years. My Expilions have been maintenance free for about 3 1/2 years. Had I not lost the old one, I'd eventually have needed to replace the battery (thought it was still giving me good run times when I lost it), but I doubt that the light would have failed me for years to come.

    And the photo below shows how many NR lights I had by the end of things (about 10 years worth). Yes, that is my bike, and those are all my lights, and I actually rode like this (as a joke). I usually rode with one or two headlights on the helmet, and up to 4 on the handlebar/handlebar extender. It took a lot of dollar store D cell batteries to get the old halogen systems up and working again for that ride (thus a further use of the handlebar bag I made for Cycle Oregon 2009). Top left was a laser from an airsoft gun I had at one time. Those lights are now in storage, and can be dragged out when I get back to the states for another "be seen" night ride.



    Dreaming of making the rockets I dreamed of as a kid (and then some).


    NAR L1 Cert flight: Sheridan, Oregon, USA. Sept. 19, 2015. Flew Deep Space OFFl on an I357T-14A Blue Thunder

Similar Threads

  1. Replies: 5
    Last Post: 7th May 2015, 03:28 PM
  2. How small is too small for a camera?
    By Nathan in forum Low Power Rocketry (LPR)
    Replies: 14
    Last Post: 2nd September 2012, 11:55 PM
  3. Is 1/8" ply too small for HP fins?
    By rifleshooter in forum High Power Rocketry (HPR)
    Replies: 5
    Last Post: 12th March 2012, 11:26 PM
  4. I small lug, 2 small lugs, 1 BIG lug...
    By Bohica in forum Low Power Rocketry (LPR)
    Replies: 4
    Last Post: 31st July 2006, 01:34 PM
  5. Replies: 3
    Last Post: 28th June 2005, 04:55 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •