Help Support RocketryForum by donating using the link above or becoming a Supporting Member.


Page 2 of 2 FirstFirst 1 2
Results 31 to 34 of 34
  1. #31
    Join Date
    15th October 2016
    Location
    Huntsville AL
    Posts
    1,677
    Quote Originally Posted by MikeyDSlagle View Post

    Were they Whites? All of the AT Whites I fly usually pop, fizz...then roar.
    I only remember the nozzles sticking out the back. Don't know what caused the delayed ignition either.



    What kind of harness are you getting for the RRC3?


  2. #32
    Join Date
    17th December 2013
    Location
    Slagle, La
    Posts
    1,255
    Quote Originally Posted by Nytrunner View Post
    I only remember the nozzles sticking out the back. Don't know what caused the delayed ignition either.



    What kind of harness are you getting for the RRC3?
    None. I had a temporary case of blindness, and maybe stupidity. The manual mentions an AUX harness and I saw the 4-pin header on the board. So I assumed I needed a harness. I didn't see the screw terminal labeled AUX right next to the header. Silly problem solved. I'll hook the lead to my lower terminal right into the AUX terminal. One 9V battery runs the whole operation. I don't know about two starters from one battery, but Jim says that's the way to do it.

    Nothing is foolproof to a sufficiently talented fool.
    TRA #16513
    Level 1: Danger Close ---AT H123W to 1240'--- 29 OCT 2016
    Level 2: Binder Design Tyrannosaur ---AT J315R to 2148'--- 30 SEP 2017

  3. #33
    Join Date
    15th October 2016
    Location
    Huntsville AL
    Posts
    1,677
    Quote Originally Posted by MikeyDSlagle View Post
    None. I had a temporary case of blindness, and maybe stupidity. The manual mentions an AUX harness and I saw the 4-pin header on the board. So I assumed I needed a harness. I didn't see the screw terminal labeled AUX right next to the header. Silly problem solved. I'll hook the lead to my lower terminal right into the AUX terminal. One 9V battery runs the whole operation. I don't know about two starters from one battery, but Jim says that's the way to do it.

    Ahhhh, gotcha.

    I was beginning to wonder if I had missed that requirement in the manual lol

  4. #34
    Join Date
    17th December 2013
    Location
    Slagle, La
    Posts
    1,255
    Quote Originally Posted by Nytrunner View Post
    Ahhhh, gotcha.

    I was beginning to wonder if I had missed that requirement in the manual lol
    Yeah, kinda what I was thinking. Grumbled and thought to myself "Why is there always an add-on...that I don't have?" Missileworks is developing a pyro expansion board but don't know if it will be available, or even needed, before my flight. Which should be February.

    Nothing is foolproof to a sufficiently talented fool.
    TRA #16513
    Level 1: Danger Close ---AT H123W to 1240'--- 29 OCT 2016
    Level 2: Binder Design Tyrannosaur ---AT J315R to 2148'--- 30 SEP 2017

Similar Threads

  1. LOC Viper 4 Build
    By grouch in forum High Power Rocketry (HPR)
    Replies: 28
    Last Post: 23rd March 2015, 03:31 PM
  2. EAC Viper XL build
    By qquake2k in forum Scratch Built
    Replies: 114
    Last Post: 9th March 2012, 03:05 PM
  3. Viper IV Build
    By berlinetta in forum Mid Power Rocketry (MPR)
    Replies: 3
    Last Post: 26th February 2010, 06:02 AM
  4. L3 Brainstorming
    By MitchR in forum High Power Rocketry (HPR)
    Replies: 23
    Last Post: 28th April 2009, 04:54 PM
  5. LOC Viper IV build
    By getoutside3274 in forum Mid Power Rocketry (MPR)
    Replies: 17
    Last Post: 25th June 2007, 02:56 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •