Help Support RocketryForum by donating using the link above or becoming a Supporting Member.


Page 2 of 2 FirstFirst 1 2
Results 31 to 41 of 41
  1. #31
    Join Date
    15th May 2016
    Posts
    2,007
    You will also need a drivers license to drive to the field. Make sure to have that.

    David McCann
    Dave's Rockets | My Flights
    URRG |URRF 4| Level 2 | TRA# 14210

  2. #32
    Join Date
    13th August 2017
    Location
    SEPA
    Posts
    70
    AT 24mm F reloads don't have hazmat charge when shipping

    NAR# 104365

  3. #33
    Join Date
    9th April 2011
    Location
    Plano, TX
    Posts
    2,547
    Quote Originally Posted by DavidMcCann View Post
    You will also need a drivers license to drive to the field. Make sure to have that.
    I wonder how many people caught that?


    Sent from my iPad using Rocketry Forum
    Jarrett Dorough

    Most people are average

  4. #34
    Join Date
    15th May 2016
    Posts
    2,007
    Quote Originally Posted by grouch View Post
    I wonder how many people caught that?
    I'm guessing less than 5.
    David McCann
    Dave's Rockets | My Flights
    URRG |URRF 4| Level 2 | TRA# 14210

  5. #35
    Join Date
    1st May 2011
    Location
    Utah Canyon Country
    Posts
    2,354
    Quote Originally Posted by DavidMcCann View Post
    I really really like the aerotech 29mm line.

    29/40-120 case-
    E16W, E23T, F22J, F40W, F52T,G53FJ, G64W, G76G, and G138T (W is White, J and FJ are smokey, G for Green, T is Blue. Be aware the smaller AT blues aren't very blue. The G138T is very blue, also it and the F loads require hazmat, the others do not) Reloads in the case can be had CHEAP from hobbylinc and most other vendors. G76G's go for $10-11.
    The 60 has the F37W and F62T.
    The 100 has the G54W, and G104T,
    The 120 has the G77R, G79W, G25W. (G25 is haz, other 2 are not)
    The 180 case has a G75J (hazmat) load thats a full G.
    The 180 case has High power loads for H128W, H165R, and H238T no haz $19
    The 240 case has High power loads for H180W, H210R, H220T, H250G, and H97J (H97 is haz, rest non haz) $22
    The 360 case has High power loads for H268R, and I200W non hazmat. $30

    This here is a very handy, and quite useful, outline of the line.
    Well worth cutting and pasting, or at the very least bookmarking, for later reference.
    Thanks for posting it (and nice pics too).

    To add my own take:
    I've flown a ton of, and always enjoyed: F40Ws, G53FJs, G76Gs, H128Ws, H165Rs, H180Ws, H210Rs, H250Gs, and I200Ws. All great stuff. My 29/40-120 cases were definitely my most used hardware.

    s6
    - Yes, I did a search before posting. -

  6. #36
    Join Date
    15th May 2016
    Posts
    2,007
    Quote Originally Posted by stealth6 View Post
    This here is a very handy, and quite useful, outline of the line.
    Well worth cutting and pasting, or at the very least bookmarking, for later reference.
    Thanks for posting it (and nice pics too).

    To add my own take:
    I've flown a ton of, and always enjoyed: F40Ws, G53FJs, G76Gs, H128Ws, H165Rs, H180Ws, H210Rs, H250Gs, and I200Ws. All great stuff. My 29/40-120 cases were definitely my most used hardware.
    Thanks... These motors are a really economical way to fly a lot of rockets really easily. I can put just about any of them in my Optima and have a great flight. going super high and super fast on a DD flight is really cool, but there's something to the simplicity of tossing a few loaded motors in a cargo pocket, and just fly, recover, prep in field and walk right back to the pads. boom boom boom.
    David McCann
    Dave's Rockets | My Flights
    URRG |URRF 4| Level 2 | TRA# 14210

  7. #37
    Join Date
    18th November 2014
    Location
    Somewhere in Ohio
    Posts
    722
    I like my CTI 29mm 3 grain. The motors are only $20-25. There's always HAZMAT on the CTI motors, but if you have a local vendor at a launch, then you don't have to worry about HAZMAT. It's also really great to support local vendors, not always the online people.


    Thanks,
    Andrew - 14 year old rocketeer who loves to watch and fly model rockets all year long!!!
    2017 - 218.4 Ns _ Biggest motor, AT G125T, highest flight around 3,500'
    TRA Member #17056
    Owner, Andrew's Rocketry Shop - andrewsrocketryshop.blogspot.com

  8. #38
    Join Date
    5th February 2009
    Location
    Montreal, Qweebec
    Posts
    3,270
    "Online people" are sometimes "local sellers"..

    Ask Tim & Gloria..
    -paul

    NAR# 101258 - L1
    www.CRMRC.org
    I don't know the same things you don't know..

  9. #39
    Join Date
    29th July 2012
    Posts
    858
    Quote Originally Posted by cerving View Post
    Get a 29/40-120 case and fly the heck out of it, the loads are all cheap and no hazmat. When you decide to go into HPR, get either an AT 29/240 set or a CTI 3G set. Some dealers used to give you the CTI 3G cert load when you bought the hardware... don't know if that's true anymore.
    Actually the cert deal is the case free -- closure, etc. not included -- with purchase of the reload. Still appears to be a thing, don't certify without it . Some will even let you use it as a credit towards any hardware, such as the starter kit, but CTI does just send the 3G case so some have an excess of them.

    Note that if one wants to push the max. *without certification*, there aren't a lot of high G motors. The 29/40-120 only goes up to 118 N-s except for the high power G138. The G80 SU/DMS is 137 N-s. The 29/180 has the G75 but is an expensive combo if you're not using any of the other loads for the case. CTI, however, has 2 high G motors for the 29-3G, the G54 at 159 N-s and the G33 at 143.

    (OTOH, if you fly with a club with a max. F on the low power pads, you might want the 29/40-120 for the F40 and F52. CTI does not make a high F of any kind.)
    :dark:

  10. #40
    Join Date
    21st September 2017
    Location
    NY/NJ
    Posts
    169
    Quote Originally Posted by bill_s View Post
    Actually the cert deal is the case free -- closure, etc. not included -- with purchase of the reload. Still appears to be a thing, don't certify without it .
    Really?
    Who is offering that deal?

    I haven't heard of ANY deals on CTI hardware+loads since the fire of 2+ years ago...

    a
    __
    Radrocketeers.org NAR L2

  11. #41
    Join Date
    28th June 2017
    Location
    Northern VA
    Posts
    81
    Quote Originally Posted by afadeev View Post
    Really?
    Who is offering that deal?

    I haven't heard of ANY deals on CTI hardware+loads since the fire of 2+ years ago...

    a
    AMW still offers it

    Trevor Mushung
    NAR 99446

Similar Threads

  1. 18mm reload hardware
    By ScrapDaddy in forum Yard Sale / Wanted
    Replies: 1
    Last Post: 9th February 2010, 10:04 PM
  2. 38 mm (360ns)reload hardware for sale and more
    By rocketaholic in forum Yard Sale / Wanted
    Replies: 2
    Last Post: 3rd January 2010, 12:26 AM
  3. reload hardware
    By Jeff in forum Propulsion
    Replies: 19
    Last Post: 4th November 2006, 12:02 PM
  4. Reload hardware
    By JJI in forum Mid Power Rocketry (MPR)
    Replies: 23
    Last Post: 15th July 2006, 02:01 AM
  5. need photos of reload hardware for project
    By Lawndart in forum The Watering Hole
    Replies: 7
    Last Post: 21st July 2005, 05:53 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •