Help Support RocketryForum by donating using the link above or becoming a Supporting Member.


Results 1 to 20 of 20

Thread: Men Into Space

  1. #1
    Join Date
    27th October 2009
    Location
    Brigham City, UT
    Posts
    2,132

    Men Into Space

    "Men Into Space" was a TV series back in the 1959-1960 time frame. The show was a sci-fi about what manned space flight would be like in the near future and tried to be as realistic as possible on a limited budget and using real scientific principles. Some of the special effects are wanting and others are not too bad considering that this was filmed nearly 60 years ago, long before computer animation came into being. Unfortunately, many of the predictions have still yet to come to pass. One of the filming techniques was take a real rocket film footage and use it in the show as a substitute for the proposed rocket taking off. Here is a picture of Col. Ed McCauley holding a modified Atlas with the manned spaceship on top.

    Click image for larger version. 

Name:	mooneprobe5.png 
Views:	87 
Size:	207.6 KB 
ID:	329402


  2. #2
    Join Date
    5th December 2013
    Location
    MD
    Posts
    6,698
    I have some old Star Trek comic books from the 1970s, and one of them has a Star Trek timeline. It starts with Sputnik and works its way up to the original series.

    It was amazingly accurate, with very close dates for the moon landing, space shuttle, ISS, etc. But then the next step was a moon base by the year 2000 (I think), a Mars landing by 2005 or something like that. So, it becomes very obvious that the USA sort of abandoned the space program around the turn of the century in real life. We are only now talking about a potential moon base and Mars flight.


    John S. ---- NAR #96911 ---- TRA #15253 ---- MDRA #067 ---- BARC #028
    L1, 3/15/14: Aerotech Sumo, CTI H133BS
    L2, 6/21/14: Giant Leap Vertical Assault, CTI J240RL
    L3, 3/12/16: MAC Performance Radial Flyer, CTI M1101WH
    Altitude: 13,028', L3 flight; Speed: Mach ???, L3 flight

  3. #3
    Join Date
    27th October 2009
    Location
    Brigham City, UT
    Posts
    2,132
    Interestingly enough, their Atlas missile had some upper staging that is nothing like the real original Atlas. The nice thing about these pictures is that they give some size relationship of the spaceship to the Atlas rocket.

    Click image for larger version. 

Name:	moonprobe2.png 
Views:	52 
Size:	84.6 KB 
ID:	329403 Click image for larger version. 

Name:	moonprobe1.png 
Views:	52 
Size:	113.5 KB 
ID:	329404

    It just so happens that Fantastic Plastic makes a 1:48 scale of the Men Into Space spaceship (They call Rocketship Type 1). The base of their model is about 3.1 inches in diameter. If I assume that this diameter is perfectly matched with the Atlas rocket 10 foot (120") diameter, I get a different scale of 1:38. Allen Ury at Fantastic Plastic that they based their scale off of screen shots and basing the height of a man as 6 feet.

    Click image for larger version. 

Name:	18SFP34_Men-Into-Space_03.jpg 
Views:	55 
Size:	28.3 KB 
ID:	329405
    Last edited by aerostadt; 5th October 2017 at 12:09 AM.

  4. #4
    Join Date
    27th October 2009
    Location
    Brigham City, UT
    Posts
    2,132
    So, I got the Men Into Space rocket ship model this past summer.

    Click image for larger version. 

Name:	IMG_4496.jpg 
Views:	36 
Size:	160.7 KB 
ID:	329422 Click image for larger version. 

Name:	IMG_4497.jpg 
Views:	28 
Size:	138.9 KB 
ID:	329423

    I then needed to decide what to do for the Atlas model. At first I thought of making an Atlas model from scratch to have a 3.1" diameter. Rocketguy101, who has an excellent thread on TRF for making an Atlas from scratch, was nice enough to send me all his plans. I want to tell him "thank you" for this. Ultimately, I chickened out from building from scratch and instead bought the 1:35 scale Estes Atlas on e-bay. The Estes Atlas has about a 3.43" diameter, which is a little bit larger than the Fantastic Plastic model.
    Last edited by aerostadt; 5th October 2017 at 12:17 AM.

  5. #5
    Join Date
    28th September 2017
    Posts
    8
    FWIW Comet TV runs Men Into Space fairly regularly.

  6. #6
    Join Date
    27th October 2009
    Location
    Brigham City, UT
    Posts
    2,132
    Quote Originally Posted by gjxj View Post
    FWIW Comet TV runs Men Into Space fairly regularly.
    Thanks, I will try to find Comet TV. I have not heard of it before. Several years ago I bought the Men Into Space DVD set from VintageTVandMore on the internet.

  7. #7
    Join Date
    28th May 2009
    Location
    North Las Vegas, Nevada
    Posts
    54
    A definitive history of the series is also available on Amazon, in both Kindle and print editions: https://smile.amazon.com/Men-Into-Sp...men+into+space
    Charles E. (Chuck) Corway
    NAR 45040 (HARA #403)
    (formerly) TRA 977
    The Kwaj Drafter!
    Kwajalein Atoll - 2009-2012; 2015-2017

  8. #8
    Join Date
    27th October 2009
    Location
    Brigham City, UT
    Posts
    2,132
    Quote Originally Posted by AlphaSigOU View Post
    A definitive history of the series is also available on Amazon, in both Kindle and print editions: https://smile.amazon.com/Men-Into-Sp...men+into+space
    Chuck, thanks, for the tip.

    In building the Estes Atlas I decided to use the clear plastic fin method that I used before in making the Estes Atlas Mercury. The basic method is described on the Rocket Reviews website:

    https://www.rocketreviews.com/atlas-mercury-7009.html
    Last edited by aerostadt; 6th October 2017 at 05:40 PM.

  9. #9
    Join Date
    27th October 2009
    Location
    Brigham City, UT
    Posts
    2,132
    In the process of making new clear plastic fins I found that I had to re-teach myself how to do this. I bought the 3/32" thick plastic a few years ago from Ridout Plastics Co., Inc., San Diego, CA. It has a blue film on both sides. I found that peeling off the blue film on both sides and then cutting with a scroll saw is a bad idea. The plastic can chip if the scroll saw is going to slow or melt if the saw is going to fast. Leaving the blue film on one side works great with the scroll saw on about 1/4 speed. In addition the blue film works great for marking the pattern to be cut with a Sharpie magic market.

    Click image for larger version. 

Name:	IMG_4489.jpg 
Views:	18 
Size:	116.0 KB 
ID:	329556

    I'm now on my way to building a clear plastic fin mount for the Atlas.

    Click image for larger version. 

Name:	IMG_4491.jpg 
Views:	22 
Size:	76.5 KB 
ID:	329557 Click image for larger version. 

Name:	IMG_4493.jpg 
Views:	22 
Size:	82.7 KB 
ID:	329558 Click image for larger version. 

Name:	IMG_4495.jpg 
Views:	20 
Size:	115.9 KB 
ID:	329559
    Last edited by aerostadt; 6th October 2017 at 06:07 PM.

  10. #10
    Join Date
    27th January 2009
    Location
    Oregon
    Posts
    2,055
    Bob, are you 100% convinced you want to use the plug in clear fins? I'd really recommend doing through the wall polycarbonate 1/16" triangluar fin method I used on mine, it's lighter, didn't need any nose weight, and are very flexible for landing....I simply slotted the lower section/skirt and used a flexible clear glue to hold them in place...3/32" is way overkill in this size. I use 1/16" in my 10" diameter 6# foam version....

    Frank

  11. #11
    Join Date
    27th October 2009
    Location
    Brigham City, UT
    Posts
    2,132
    Quote Originally Posted by burkefj View Post
    Bob, are you 100% convinced you want to use the plug in clear fins? I'd really recommend doing through the wall polycarbonate 1/16" triangluar fin method I used on mine, it's lighter, didn't need any nose weight, and are very flexible for landing....I simply slotted the lower section/skirt and used a flexible clear glue to hold them in place...3/32" is way overkill in this size. I use 1/16" in my 10" diameter 6# foam version....

    Frank
    Frank, that is impressive using only 1/16" thick plastic on a 10" diameter project. You really know how to keep the weight down. I have used this 3/32" thick plastic fin before on the Estes Atlas Mercury as shown in the Rocket Reviews article and it worked fine. That model did need a little bit of forward lead weight, but that model was powered by a cluster of 3 black powder D12's in the aft end, which is 2 more motors than what the kit was originally designed for. The 2 extra D-motors weighed a lot more than the extra 1/32" of clear plastic. This time I am making the small fin mount struts from basswood, which I found in my inventory. That stuff if pretty light. Even though, I have the option to put motors in the Atlas outboard skirt, I will probably use a composite 24 mm motor for at least the first flight. (I am thinking about putting wires for the outboards for a possible air-start.)

  12. #12
    Join Date
    27th October 2009
    Location
    Brigham City, UT
    Posts
    2,132
    The clear fin unit turned out pretty good. This is the second time that I have made such a unit. I have installed wires for the outboard motors just in case I ever want to try electronic ignition. This remains to be seen. I may never use the outboard motors on this model at all.

    Click image for larger version. 

Name:	IMG_4507.jpg 
Views:	31 
Size:	127.2 KB 
ID:	330279 Click image for larger version. 

Name:	IMG_4509.jpg 
Views:	30 
Size:	84.3 KB 
ID:	330280 Click image for larger version. 

Name:	IMG_4510.jpg 
Views:	33 
Size:	82.3 KB 
ID:	330281
    Click image for larger version. 

Name:	IMG_4512.jpg 
Views:	31 
Size:	112.7 KB 
ID:	330282 Click image for larger version. 

Name:	IMG_4515.jpg 
Views:	29 
Size:	102.8 KB 
ID:	330283

  13. #13
    Join Date
    15th October 2016
    Location
    Huntsville AL
    Posts
    1,586
    Quote Originally Posted by aerostadt View Post
    I may never use the outboard motors on this model at all.
    Oh, if that were the case you wouldn't have shoved those tubes back there!

    This is really neat, keep up the good work.
    "I'm at least 70% confident about whatever I say (90% of the time)"- college me

    NAR 101195
    Level 1: Big SAM, 9/10/16

  14. #14
    Join Date
    27th October 2009
    Location
    Brigham City, UT
    Posts
    2,132
    After setting up the model for clear plastic fins the rest of the construction pretty much follows the original Estes Atlas/Mercury plans. The Estes plans are well written and easy to follow. Attached are some photo's of the current progress. I replaced the Estes 1/8" diameter soda launch lug with something larger. With such fantastic detail with the Estes plastics parts for this model it seems inconsistent to have such some launch lugs for such a larger model. Although the photo's show the external LOX line, it has not been glued in place, yet, because it will be removed for painting.

    Click image for larger version. 

Name:	IMG_4529.jpg 
Views:	25 
Size:	85.7 KB 
ID:	331661 Click image for larger version. 

Name:	IMG_4530.jpg 
Views:	30 
Size:	90.4 KB 
ID:	331662
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	003.jpg 
Views:	26 
Size:	93.1 KB 
ID:	331658  

  15. #15
    Join Date
    27th October 2009
    Location
    Brigham City, UT
    Posts
    2,132
    I thought of cutting the transition section that comes with the original Estes kit, but decided against doing this. So, I drew a crude sketch and after working with the Sandman at Roachwerks, Gordon came up with a plan for the new transition section and made a new drawing. The professional looking drawing is Gordon's.
    Attached Files Attached Files

  16. #16
    Join Date
    27th October 2009
    Location
    Brigham City, UT
    Posts
    2,132
    The transition section part made from basswood by Gordon came yesterday and fits perfectly.

    Click image for larger version. 

Name:	001.jpg 
Views:	16 
Size:	121.6 KB 
ID:	331712 Click image for larger version. 

Name:	002.jpg 
Views:	17 
Size:	62.0 KB 
ID:	331713 Click image for larger version. 

Name:	003.jpg 
Views:	16 
Size:	85.2 KB 
ID:	331714

    Click image for larger version. 

Name:	004.jpg 
Views:	16 
Size:	58.4 KB 
ID:	331715 Click image for larger version. 

Name:	005.jpg 
Views:	19 
Size:	62.3 KB 
ID:	331716

  17. #17
    Join Date
    27th October 2009
    Location
    Brigham City, UT
    Posts
    2,132
    The Convair X-11 was an early test program for the Atlas missile in 1957. The Atlas had the 2 outer boosters locked into position and the sustainer engine was not present. The paint scheme had a black and white roll pattern on the upper body and the booster shrouds were painted red. This paint scheme was adopted for the Atlas model used in the Men Into Space TV series as shown in Posts #1 and #3.

    Click image for larger version. 

Name:	19580719_003B_0331.JPG 
Views:	13 
Size:	103.5 KB 
ID:	332520 Click image for larger version. 

Name:	hqdefault.jpg 
Views:	16 
Size:	21.9 KB 
ID:	332521

  18. #18
    Join Date
    27th October 2009
    Location
    Brigham City, UT
    Posts
    2,132
    I used tamiya tape masked for white, silver and red painting separately. I did not paint on top of paint. The silver was Rustoleum Metallic Finish aluminum. The white was Rustoleum Paint + Primer 2X semi-gloss white. The red was Krylon Dual Superbond paint + primer gloss banner red. I still have the black pattern to do.

    Click image for larger version. 

Name:	001.jpg 
Views:	13 
Size:	99.5 KB 
ID:	332522 Click image for larger version. 

Name:	002.jpg 
Views:	13 
Size:	108.1 KB 
ID:	332523 Click image for larger version. 

Name:	003.jpg 
Views:	17 
Size:	93.9 KB 
ID:	332524

    Click image for larger version. 

Name:	004.jpg 
Views:	15 
Size:	69.6 KB 
ID:	332525 Click image for larger version. 

Name:	005.jpg 
Views:	13 
Size:	72.0 KB 
ID:	332526 Click image for larger version. 

Name:	006.jpg 
Views:	18 
Size:	64.2 KB 
ID:	332527

  19. #19
    Join Date
    18th January 2009
    Location
    Virginia - Central
    Posts
    3,867
    Looks good. REAL Good.
    We got two categories of pilots around here. We got your prime pilots that get all the hot planes, and we got your pud-knockers who DREAM about getting the hot planes.
    Now what are you two pud-knockers gonna have?... Huh?
    Pancho Barnes-
    The Right Stuff
    http://www.mwavs.com/0053148414/M4RS...udknockers.m4r

    Tripoli #2747

  20. #20
    Join Date
    27th January 2009
    Location
    Oregon
    Posts
    2,055
    I agree, I like that color scheme.


Similar Threads

  1. Red Space: The Secret Russian Space Program - Life and Death
    By Winston in forum The Watering Hole
    Replies: 26
    Last Post: 7th April 2017, 07:23 PM
  2. Replies: 34
    Last Post: 17th May 2016, 03:49 PM
  3. Space Shuttle Atlantis opens at Kennedy Space Center
    By Mushtang in forum The Watering Hole
    Replies: 5
    Last Post: 7th July 2013, 06:00 PM
  4. Replies: 5
    Last Post: 26th March 2008, 09:15 PM
  5. Replies: 10
    Last Post: 18th January 2007, 11:35 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •