• If you have bought, sold or gained information from our Classifieds, please donate to Rocketry Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

STAINLESS STEEL M PAD

The Rocketry Forum

Help Support The Rocketry Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

exracer

Member
Joined
Dec 20, 2015
Messages
20
Reaction score
0
5' X 5' BASE STAINLESS STEEL PAD FULL TIG WELDED AND WILL NEVER RUST, EASY CLEAN WITH 10 RAIL IF YOU NEED THAT TOO. AS YOU CAN SEE IN THE PHOTOS IT TILTS DOWN WITH EASE FOR LOADING YOUR M MOTOR ROCKET. VERY EASY TO TEAR DOWN WITH ONLY A 3/4" WRENCH. TWO PLASTIC HANDLES THAT'S IT ALL OTHER COMPONETS ARE 100% STAINLESS STEEL. 1-1/2 SQUARE TUBING SETTING ON ADJUSTABLE HEIGHT PADS ON ENDS.

STAINLESS PAD.jpg

STAINLESS PAD 1.jpg

STAINLESS PAD 2.jpg

STAINLESS PAD 3.jpg

STAINLESS PAD 5.jpg
 
I like your design, especially the way it pivots high, locks down low, and lowers a full 90 degrees for loading. Is there adjustable feet at the three corners?
 
Back
Top