This is what Sabrina will be handing out at the banquet, to somebody other than Gus...
This is nice and all, but how are Sabrina's sideburns going? She's competing, right?
This is what Sabrina will be handing out at the banquet, to somebody other than Gus...
Anyone know when pre-registration closes?
I'm sure it's here somewhere but I am not seeing it.
Thanks
This is nice and all, but how are Sabrina's sideburns going? She's competing, right?
the judge.
Do you have some objective criteria for sideburn judging? Overall density? Length from bottom of ear? Symmetry? Overall awesomeness?
What's the motor limit at the night launch?
Are level I motors allowed?
Fly with the BEST at the BEST launch - Midwest Power 15.
Over 150 HPR flyers registered - going to be an awesome launch - Online Pre-Registration is open until This coming Friday @ midnight.
Don't Delay, don't miss your chance!
Fly with the BEST at the BEST launch - Midwest Power 15.
Jim,
3 extra tickets? Were you planning on bringing an entourage?
Sent from my iPhone using Rocketry Forum
So what's everyone flying? I'm hoping to get three flights in:
- 5.5" Nike on an AT L-900 Dark Matter
- 4" Eclipse SS on an M-1500 Mojave Green
- 54mm MAC Monarch on a K-535 DMS (should do about 12-13K)
3 flights for me too.
L3 cert flight on 6" v2- M1780
2.6" Darkstar on 5 grain EX white 54- maybe a K500?
4" punisher on L960 EX motor.
And maybe the turkey rocket.
Sent from my iPhone using Rocketry Forum
The calm before the storm: most of the 57 grains of Sconnie propellant being prepped for MWP!
So what's everyone flying? I'm hoping to get three flights in:
- 5.5" Nike on an AT L-900 Dark Matter
- 4" Eclipse SS on an M-1500 Mojave Green
- 54mm MAC Monarch on a K-535 DMS (should do about 12-13K)
Umm... dang! That's a lot of grains. I'm assuming they're all going in one rocket, right?
Care to share what the names of the propellants are?
23" in diameter, 17.3594' tall, 325lbs.
Absolutely; one airframe only! 23" in diameter, 17.3594' tall, 325lbs.
Only three propellant types this time around: Sparky, White, and RP4. Sparky and White are Sconnie flavors, RP4 is a clone of one of my all time favorite "commercial" propellants with a storied past. Here's to you, Frank!
Absolutely; one airframe only! 23" in diameter, 17.3594' tall, 325lbs.
Only three propellant types this time around: Sparky, White, and RP4. Sparky and White are Sconnie flavors, RP4 is a clone of one of my all time favorite "commercial" propellants with a storied past. Here's to you, Frank!
Please tell me that launches on Saturday!
WHAT!? Holy smokes - what day? Need some help at the pad or carrying recovery I’d love to help
Sent from my iPhone using Rocketry Forum
Please tell me that launches on Saturday!
Nick, Mark,
I was answering Glen's slightly silly question with a slightly silly response. Sorry for any confusion.:blush:
There are a lot of cluster and drag race motors in there however. From Left to Right:
-(3) 54-4G Sparkies for the King Viper III
-(2) 75-3G RP-4 for 7.5" Patriot drag race. Have one more of these made up for a 4" Drago (not shown)
-(1) 75-3(short)G White: 5.5" IQSY Tomahawk
-(1) 75-5(short)G White: 7.5" Hawk
-(3) 75-4(short)G Sparky: 7.5" Mother Lode
-(1) 75-8G: 7600 Sparky: 4" Competitor
Not all my rockets. Commercial motors not pictured. Throw in some I180 skids and D12's for that. Can't wait to see everybody next week!
Hopefully your KVIII flight is better than mine was .
Enter your email address to join: