Back when you could buy these kits I bought (2) one for myself and one for a friend of mine, who ended up not wanting his anymore. I have one that's currently half built in my build pile, but the second one needs someone who has an eye for detail and passion to build, so that includes just about 99.9% of everyone on this forum
So I did make some changes to the kit and I'm also giving you some options. First a quick description of the parts. All the tubes and nose cone are from LOC and are of the highest quality. The big difference between this kit and the original is the balsa wings, stabilizers and fins are laser cut. The original kit came with hand cut balsa. Another change I made was I replaced the original 24" and 30" Topflight chutes with (2) 30" Topflight "X" form chutes. I like the "X" form chutes because the shroud lines don't cross and tangle.
1st Option - Kit without the extras w/Laser cut balsa parts - $150
2nd Option - Kit without the extras w/Laser cut basswood parts - $150
3rd Option - Kit with all the extras listed below - Add $50
All the laser cut parts are still in the sealed bags directly from the wood cutter. I had to remove the vertical stabilizer because the upper piece was halfway apart so I applied some CA glue. It's perfectly fine now. You can't tell, but I included a close up photo.
This is your chance to own an awesome kit, that you no longer can get.
Prices do not include shipping - SOLD
PayPal welcomed
Just an FYI: The ROCKSIM file that's available for this kit is invalid and the dimension are completely off. I compared the wings, stabilizers and other pieces. Not just a little, but way off.
Special Note: If you decide to go with Option #2 you will need to adjust the CG and CP according. The kit was designed with balsa and the supplied ballast of 12oz.
Extras -
So I did make some changes to the kit and I'm also giving you some options. First a quick description of the parts. All the tubes and nose cone are from LOC and are of the highest quality. The big difference between this kit and the original is the balsa wings, stabilizers and fins are laser cut. The original kit came with hand cut balsa. Another change I made was I replaced the original 24" and 30" Topflight chutes with (2) 30" Topflight "X" form chutes. I like the "X" form chutes because the shroud lines don't cross and tangle.
1st Option - Kit without the extras w/Laser cut balsa parts - $150
2nd Option - Kit without the extras w/Laser cut basswood parts - $150
3rd Option - Kit with all the extras listed below - Add $50
All the laser cut parts are still in the sealed bags directly from the wood cutter. I had to remove the vertical stabilizer because the upper piece was halfway apart so I applied some CA glue. It's perfectly fine now. You can't tell, but I included a close up photo.
This is your chance to own an awesome kit, that you no longer can get.
Prices do not include shipping - SOLD
PayPal welcomed
Just an FYI: The ROCKSIM file that's available for this kit is invalid and the dimension are completely off. I compared the wings, stabilizers and other pieces. Not just a little, but way off.
Special Note: If you decide to go with Option #2 you will need to adjust the CG and CP according. The kit was designed with balsa and the supplied ballast of 12oz.
Extras -
- (2) Madcow Nomex blankets 9x9 (Orange)
- (1) Aeropack Retainer 29mm
- (2) 225lb Quick Links
- (2) 600lb Barrel Swivels