ksm2001
Well-Known Member
- Joined
- Dec 12, 2011
- Messages
- 322
- Reaction score
- 27
Thought I'd post my problem and see if anyone else had this happen to them.
I painted a fiberglass body tube week ago and its still very tacky, cannot touch at all or it will leave fingerprints and possibly stick to my hand.
Primed first with Duplicolor Filler Primer using the cans in the picture below, then after 30 min painted the top coat with Rustoleum 2x Painters touch.
I used a different duplicolor primer (with Alkyde Polymer) written on the can, that I had left over and primed a smaller fiberglass body tube and used the same can of black painters touch and its good,dry not tacky at all after only a few days. Both were painted in the same location and the same day.
I painted a fiberglass body tube week ago and its still very tacky, cannot touch at all or it will leave fingerprints and possibly stick to my hand.
Primed first with Duplicolor Filler Primer using the cans in the picture below, then after 30 min painted the top coat with Rustoleum 2x Painters touch.
I used a different duplicolor primer (with Alkyde Polymer) written on the can, that I had left over and primed a smaller fiberglass body tube and used the same can of black painters touch and its good,dry not tacky at all after only a few days. Both were painted in the same location and the same day.