ChuckH
Well-Known Member
- Joined
- Aug 11, 2011
- Messages
- 539
- Reaction score
- 335
UPDATE: I'll ship any of the items. Buyer pays shipping.
Time to thin the collection.
*All items are new and unused unless otherwise stated.
3” 5:1 Von Karman filament wound fiberglass nose cone with aluminum tip. SOLD
4” Performance Rocketry 3:1 ogive fiberglass nosecone. SOLD
2.6” 4:1 ogive plastic nosecone. $10
OneBadHawk 11/32" x 25 Ft. Tubular Kevlar harness with 3 sewn loops. SOLD
OneBadHawk 9/16" x 25 Ft. Tubular Nylon harness with 3 sewn loops, Kevlar sleeve and stainless delta quick link. Note this is 5 feet longer than standard. SOLD
(3) Sparkfun 400 mAh LiPo batteries. https://www.sparkfun.com/products/10718 I just bought these a month ago and have a few extra. $7 each. SOLD
Rocketman 18 Ft. Pro Experimental chute. Flown 3 times with CO2 ejection only, so no burn holes, scorch marks, BP residue or stink. Like new except for a little dust. SOLD
Custom fin set made from 3/8" thick carbon fiber/Nomex honeycomb composite board - $125
Light weight and very strong, these were originally for a 7.5" diameter project with a 4" motor mount. Edged with 3/8 wooden dowels. The dimensions are as follows:
Root chord: 24.5"
Span: 10.125"
Tip chord: 7.5"
Sweep length: 14.5"
Tab depth: ~1.875"
Weight: ~10.5 oz per fin
Time to thin the collection.
*All items are new and unused unless otherwise stated.
3” 5:1 Von Karman filament wound fiberglass nose cone with aluminum tip. SOLD
4” Performance Rocketry 3:1 ogive fiberglass nosecone. SOLD
2.6” 4:1 ogive plastic nosecone. $10
OneBadHawk 11/32" x 25 Ft. Tubular Kevlar harness with 3 sewn loops. SOLD
OneBadHawk 9/16" x 25 Ft. Tubular Nylon harness with 3 sewn loops, Kevlar sleeve and stainless delta quick link. Note this is 5 feet longer than standard. SOLD
(3) Sparkfun 400 mAh LiPo batteries. https://www.sparkfun.com/products/10718 I just bought these a month ago and have a few extra. $7 each. SOLD
Rocketman 18 Ft. Pro Experimental chute. Flown 3 times with CO2 ejection only, so no burn holes, scorch marks, BP residue or stink. Like new except for a little dust. SOLD
Custom fin set made from 3/8" thick carbon fiber/Nomex honeycomb composite board - $125
Light weight and very strong, these were originally for a 7.5" diameter project with a 4" motor mount. Edged with 3/8 wooden dowels. The dimensions are as follows:
Root chord: 24.5"
Span: 10.125"
Tip chord: 7.5"
Sweep length: 14.5"
Tab depth: ~1.875"
Weight: ~10.5 oz per fin
Last edited: