ChrisAttebery
Well-Known Member
- Joined
- Feb 15, 2014
- Messages
- 2,454
- Reaction score
- 90
I've designed a screwdriver guide for Missile Work's screw switches. The hole for the screwdriver is 3/16" and it's tapered 90 degrees. It's sized for a precision #1 screwdriver like a Wiha. I've pocketed the backside so the screw is captured and cannot fall out.
They are .375" tall x .400" wide x .875" long and they weigh 2.7g each. They require a #4 cap head screw that is 1/4" longer than if you mounted the switch by itself.
I've added them to my web store. I've priced them at $1.50 each with a minimum order of 5 pieces.
https://ape-rc.com/#!/Missile-Works-Screw-Switch-Screwdriver-Guide/p/65647195/category=11909535
They are .375" tall x .400" wide x .875" long and they weigh 2.7g each. They require a #4 cap head screw that is 1/4" longer than if you mounted the switch by itself.
I've added them to my web store. I've priced them at $1.50 each with a minimum order of 5 pieces.
https://ape-rc.com/#!/Missile-Works-Screw-Switch-Screwdriver-Guide/p/65647195/category=11909535
Last edited: