Help Support RocketryForum by donating using the link above or becoming a Supporting Member.


Page 1 of 4 1 2 3 4 LastLast
Results 1 to 30 of 117
  1. #1
    Join Date
    31st March 2016
    Posts
    2

    Cesaroni Technology Incorporated News and Well-Wishes thread

    On Thursday, March 24th at approximately 10:30 AM EST, a fire broke out during approved procedures in one of the propellant processing buildings at Cesaroni Technology Incorporated’s Gormley, Ontario facility. The fire was confined to the affected building. Surrounding buildings and structures including the main plant were not affected. Emergency response teams responded immediately. Three CTI personnel were in the area where the fire occurred. Two have been released from hospital and the third remains hospitalized.

    In light of the previous information distributed on this forum, CTI can confirm that Dr. Jeroen Louwers (TRF member "DrJ") was the third employee and that he was seriously injured/burned in the incident. He is currently in one of the best hospitals in the country. That hospital has specialty facilities that provide the best possible treatment of the injuries he sustained.

    Jeroen is currently in critical but stable condition. We understand that non-family visitors or contact will not be possible for many weeks and we ask everyone to be respectful of Jeroen, his family and loved ones throughout this time.

    The CTI family has been fractured by this devastating incident. Jeroen is more than just an employee; he is a cornerstone of the CTI family. He is our leader.... our colleague.... our mentor......and a close friend to everyone here.

    We know that he has also been an integral leader and friend within the hobby rocketry community and that he has touched the lives of many within that community. His enthusiasm for, and knowledge of, thehobby/sport is unparalleled, as all who have interacted with Jeroen over the years can attest.
    The CTI family is looking forward to Jeroen’s recovery, but it will be a long process. CTI will not be posting updates in this forum on Jeroen's health out of respect for him and his family as they endure the recovery process.

    For anyone who has visited CTI, they that know we are a tight knit family, so please be patient and respectful during our healing process as well. We will be forthcoming with information at the appropriate times. and in the interim, we ask that you not speculate, postulate, draw conclusions, etc. regarding the incident.......Do this out of respect for Jeroen! Anyonewho knows him understands that is what he would want.

    The incident is currently under investigation by the relevant public authorities with CTI providing technical support. It did not involve any hobby (HPR) rocketry motors. The root cause has not yet been determined. Given the nature of this incident, the investigation may take considerable time and, while it is ongoing, CTI and its staff cannot comment further.

    For those of you wishing to show your support, as Gus highlighted in a previous post, feel free to share kind stories or experience you have had with Jeroen in the past. His family has been touched by all the support he has received to date and is being shared/communicated with Jeroen at the hospital.

    From,
    Cesaroni Technology Incorporated

    NOTE: The TRF member (CTI) posting in this forum onbehalf of CTI has done so with the direct approval from CTI and will not be responding to any private messages

    Last edited by CTI; 3rd April 2016 at 03:15 PM.

  2. #2
    Join Date
    27th July 2014
    Location
    south beloit, IL
    Posts
    1,922
    CTI- thank you for the update. Please let us know if there is anything we can do to help Jeroen- either financially or emotionally. I hope his recovery is full, and that he can return to rocketry in the near future.

    NAR# 99285
    Tripoli# 16283
    L1- 4/26/2015 Madcow Cowabunga- H123SK
    L2- 11/1/2015 Wildman Darkstar 2.6- J355RL
    Woosh
    QCRS

  3. #3
    Join Date
    8th August 2014
    Location
    Rockford, IL
    Posts
    2,315
    Quote Originally Posted by djs View Post
    CTI- thank you for the update. Please let us know if there is anything we can do to help Jeroen- either financially or emotionally. I hope his recovery is full, and that he can return to rocketry in the near future.
    Ditto... Prayers and thoughts for Dr. J and his family.
    -CzTeacherMan
    TRA #15280 - QCRS, Tripoli Wisconsin, WOOSH
    Level 1 - 9/28/2014 Wildman Sport on CTI H163 White Thunder
    Level 2 - 5/23/2015 Wildman 3" Darkstar CTI J400 Smoky Sam
    First Mile+ & Mach+ - 9/25/2015 Wildman Punisher CTI J360 Skidmark
    Level 3 - 5/15/2016 Wildman Gizmo XL-DD-V CTI M1540 Imax

  4. #4
    Join Date
    31st March 2011
    Location
    Vermont
    Posts
    449
    Been thinking of Jeroen every day since I heard of the accident. Jeroen has been very supportive and helpful to me in my rocketry hobby. He is a wealth of information and is a genuinely nice person. Thank you so much CTI for posting the full story. I am sad this incident has happened but am glad to hear some positive news regarding Jeroen. Please wish him well from Dave and Molly.
    L3 Certified
    NAR #90891, TRA #14994
    Clubs: CRMRC, METRA, MDRA

  5. #5
    Join Date
    31st December 2009
    Location
    Las Cruces, NM
    Posts
    1,260
    Quote Originally Posted by CTI View Post
    For those of you wishing to show your support, as Gus highlighted in a previous post, feel free to share kind stories or experience you have had with Jeroen in the past.
    My heart goes out to Jeroen and his family. He has always, without exception, gone far beyond what anyone would expect when asking for assistance. It's obvious that he loves what he does! Personally, I've received phone calls from him when I hadn't expected more than a quick email. Timely responses, good-natured about my confusion, and always gracious.

    In the week before the accident, I received quick email responses back from Jeroen on two different problems. One was a warranty replacement on a Pro98XL casing, the other was a defective DAT that was causing short delays for the TARC team I'm mentoring. He cares equally about both ends of the hobby rocket spectrum.

    I hope our kind thoughts and prayers will help Dr J find strength during the healing process. Looking forward to seeing him back doing what he loves to do! Best wishes to the whole CTI family.

  6. #6
    Join Date
    2nd August 2009
    Location
    CT
    Posts
    101
    This was no doubt a horrible accident and i cannot begin to imagine how it has affected the entirety of your organization. Thank you for taking the time to update this forum. You are a class act. You have had and will continue to have my support. I wish not only the three employees a speedy recovery, but also the CTI organization as a whole.

  7. #7
    Join Date
    19th January 2009
    Location
    NE Illinois
    Posts
    909
    Please give my best to Jeroen. We've had numerous email messages back and forth over the years, and his helpfulness and concern for his customers was evident. He's one of the good guys!
    Premium parachutes & recovery supplies
    www.dinochutes.com

  8. #8
    Join Date
    20th January 2009
    Location
    British Columbia, Canada
    Posts
    755
    CTI, thank you for the information. A day has not gone by since the incident that I haven't thought of Jeroen and the other CTI employees. In fact, my wife asks me all the time if I have heard any more new about Dr. Louwers.
    I have never had the pleasure of meeting Jeroen however, I have corresponded with him about some technical issues. His love for rocketry was clear and obvious in his posts and emails.
    I look forward to the day that he is released from hospital and is able to recover further at home.

    Best regards to the whole CTI family.

    Len Bryan
    Len Bryan
    CAR-ACF S620 L3, NAR 98782 L2, Tripoli 10220 L2

  9. #9
    Join Date
    25th January 2009
    Location
    Glennville, GA
    Posts
    17,857
    Thanks. Our prayers and thoughts are with Dr. j and his family.
    -----------------------
    Chuck Haislip
    NAR/Tripoli Level 3
    Formerly a Prefect of ICBM - TRA #60

    Level 1 - LOC Minie Magg; Level 2 - PR Broken Arrow;
    Level 3 - 10 inch Nike Smoke
    2015 Ns for Year: 1315 Newtons
    My rockets usually fly naked. If they survive, they earn their paint.

    Come fly with ROSCo or ICBM in Camden SC => http://rocketrysouthcarolina.org

  10. #10
    Join Date
    10th December 2011
    Location
    Huntington, IN
    Posts
    565
    I have thought of Jeroen everyday sense this happened! CTI thank you for the update. Please let us know if there is anything we can do for Jeroen and his family both morally and financially! I am sure the vast majority would do anything to help this wonderful man/friend in his time of need. He has always been there for us and it is now our time to be there for him

    Dennis
    Proud Member

    Chicago Rocket Mafia
    (Graveyard)
    SCAM
    Tripoli Indiana
    QCRS

  11. #11
    Join Date
    20th January 2009
    Location
    Johnson City, NY
    Posts
    1,923
    CTI - Thank you for the update. Please let Jeroen and his family know they are in our hearts and prayers

    Best wishes for his recovery

    Les
    Rocket Addict
    More...more...I'm still not satisfied (T. Lehrer)

  12. #12
    Join Date
    20th February 2009
    Location
    Cayuga, Indiana
    Posts
    12,610
    I only met Jeroen once. It was during prep for an MWP drag race; can't remember which one, but certainly a CTI motor event. Well, I only fly CTI on occasion when the motor profile or application is compelling, otherwise, AT or Loki. So you certainly can say, I'm not their best customer--bottom 10% likely. Anyway, I was under time pressure to get out to the pads and had some questions on prepping the motor. Hadn't got it done but was walking to the RSO anyway. Well, some "white knight" noticed my predicament. More than that they stopped me, asked what my issue was, and clearly explained the solution in an unknown accent. I was truly grateful and thanked the savior--he in turn said, "Have a great flight Tim." Huh?! He knew my name? Who was that guy that came to my rescue? Well, went on to fly in the drag race, but the next day, asked about the man that was so helpful and found out it was Jeroen. How is that for going above and beyond. Must have known I was in the drag race as CTI provided the discount deal, but hey, I had never met him and as I said, not a CTI "big dog" like Gus, still, Jeroen was there helping as usual.
    L3, TRA #11847
    Tripoli Indiana #132
    Tripoli Central Illinois #59
    Central Illinois Aerospace (NAR) #527
    Chicago Rocket Mafia, "Big Bucks" Dixon
    ___________________________________

    Quiet little voices creep into my head. -- We Were Promised Jetpacks

  13. #13
    Join Date
    30th July 2012
    Posts
    1,035
    Man that is awful. My prayers are going out to Jeroen and his family. Get well soon Jeroen.
    Chris Buhr

    NAR # 93733 SR
    L1 LOC IV
    L2 Polecat 5.5 inch Nike Smoke

  14. #14
    Join Date
    1st February 2009
    Location
    Oceanside, CA
    Posts
    90
    Wow. I am absolutely horrified to read this. Dr. Louwers remains a hero of mine and I wish him the speediest of recoveries.
    Greg Smith
    TRA#8576, L3 TAP
    Rocketry Blog

  15. #15
    Join Date
    5th August 2010
    Location
    Pleasantville, Ia.
    Posts
    226
    I hope both you and CTI recover quickly , it is obvious by the posts here and at the watering hole just how respected you are Dr J ! Wishing you the best , Jim

  16. #16
    Join Date
    15th November 2013
    Posts
    1,015
    I hope DrJ recovers fully. He is an asset to the hobby and by all accounts a great guy. He has certainly helped me on more than one occasion.

    Can we all maybe stop using the past tense to talk about him though?
    Last edited by Peartree; 1st April 2016 at 04:24 PM. Reason: The thread was pruned and split. The deleted comment no longer made sense. [mods]
    Bill Cook
    NAR #96751, Level 2
    Mayhem Rocketry, LLC
    That's a nice rocket you have there...if you're looking for me, I'll be under my car.

  17. #17
    Join Date
    6th January 2009
    Location
    Northeast Ohio
    Posts
    3,524
    Okay, I locked this for a while while I spit out the questions and comments about CTI production.

    Those questions now exist as a separate thread.

    Going forward, let's keep discussions of production (as important as they may be to the TARC teams) in that thread.

    This thread is intended solely to create a conduit for our rocketry community to send well-wishes to Jeroen, his family and the fine folks at CTI.

    Any posts other than that will be removed.
    Blessings,

    John
    NAR#87984
    L1 - Airfest - September 6, 2015

    It can't be my second childhood, I haven't finished my first one yet.

    "If I were giving a young man advice as to how he might succeed in life, I would say to him, Pick out a good father and mother, and begin life in Ohio." - Wilbur Wright, January 10, 1910

    _____________________________________

    My Blog
    Other stuff I write

  18. #18
    Join Date
    6th January 2009
    Location
    Northeast Ohio
    Posts
    3,524
    From Tim (WILDMANS)

    WILDMANRS

    Dr J

    I don't think anybody here is missing Dr. J more than I'am.
    I can only hope and pray for a quick and as painless as possible recovery for him.
    If I could I would be up there waiting to see him.
    He has been a great friend for a long time.
    The man has forgotten more about rocketry than I can ever hope to know. (example)
    I received a call from a military contractor wanting a motor for a specific purpose, they gave me the specifics and I called Dr. J within seconds "I could here him typing in the background" he not only had and an answer weather or not he could do it but also a price and a time frame of how long it would take before we could have it, and he met those times.
    That is were the N10'000 came from.
    I am hoping we can have him back for Midwest Power I need to talk with him to come up with a new drag race.
    Anything you want from Home depot USA Jeroen, I have you covered
    Get well soon my friend.

    Tim
    Just Fly It
    Wildman Hobbies
    Wildman Rocketry

    Proud member of
    Chicago Rocket Mafia
    QCRS
    TWA
    Woosh
    Indiana Rocketry
    Kloudbusters
    Metra
    MDRA
    Blessings,

    John
    NAR#87984
    L1 - Airfest - September 6, 2015

    It can't be my second childhood, I haven't finished my first one yet.

    "If I were giving a young man advice as to how he might succeed in life, I would say to him, Pick out a good father and mother, and begin life in Ohio." - Wilbur Wright, January 10, 1910

    _____________________________________

    My Blog
    Other stuff I write

  19. #19
    Join Date
    19th August 2011
    Location
    Gilbert, Arizona
    Posts
    1,354
    Thank you for the update CTI!

    I hope Jeroen and his family the best during these hard times.
    Kyle G.
    TRA #13906
    Full Time Student, Part Time Rocket Scientist
    www.BlackAero.com

  20. #20
    Join Date
    19th March 2009
    Location
    Chicagoland
    Posts
    864
    I can’t stop thinking about this horrible event. I think about it, yet I am still partly in denial. Like it is something impossible, incomprehensible.

    I have been fortunate enough to meet Dr J a few times. Two of those events are memorable:

    First time I met Jeroen was at Midwest Power 9. I was one of the participants in the N-5800 drag race and chatted with Jeroen about the mighty N-5800 and a bunch of other things. Being both expats (he moved from Holland to Canada, I moved from Canada to the US) we talked, among other things, about how it feels to leave your home country and relocate your family in another country. At one point during that conversation I said, “You know, you should make and Imax reload for that 6-GXL casing”. He thought for a second and said “do you think we should make it a full impulse N for altitude records, or try to maximize the impulse and make it an O?”

    … and that is the essence of Jeroen right there. Not looking for excuses, no word about potential technical difficulties, limited market, or anything like that. He always focused on finding a way to get it done. Of course, I said “go for the maximum impulse”. Sure enough, the O-3400 came the following year.

    The other memorable meeting with Dr J was at Midwest Power 11. I had my Tintin rocket. Dr J being from Europe, he was very familiar with the Tintin comic books. We talked about the books, the rocket, and he mentioned a flyer in Europe who had built several rockets based on the same series. About a week later, I received an email from him with a picture of his friend’s rocket.

    I am sure he had conversations with a hundred people during his weekend at MWP. Somehow, after he returned home he found the time to dig out that picture and email it to me.

    We all think of you and your family, Dr J. Come back soon, we still have things to do…
    QCRS, Princeton, IL
    Indiana Rocketry, Ash Grove
    Chicago Rocket Mafia "Don Claude - The Connection"

  21. #21
    Join Date
    8th January 2013
    Location
    Denver, CO
    Posts
    320
    Thoughts and prayers daily for Jeroen and his family. I only 'met' Jeroen recently through some posts on this forum and a prompt reply to a private message I sent him. Without ever hearing his voice it was obvious he is a trustworthy and caring man. Get well!
    Kendal
    NAR #95648
    Level 1 (April 2013) - modified Estes Leviathan, 'Belly Up'
    Level 2 (August 2015) - scratch built 4" Blue Tube, dual deploy, 'The Flying Dutchman'

  22. #22
    Join Date
    11th January 2013
    Location
    Old Bridge,,,,,,,,,,,,, New Jersey
    Posts
    4,924
    I've never had the pleasure of meeting you Jeroen.
    From this outpouring of prayers, well wishers, and emotions,
    you must be a wonderful man, no doubt.
    I can only hope that we will meet some day.
    Prayers for you to get well.

    Teddy




    www.Onebadhawk.com

    Ted Chernok
    Old Bridge New Jersey
    METRA- BoD- New York..
    URRG- Way upstate New York..
    MDRA- Maryland..
    QCRS- Illinois- Best politicians money can buy ( Tim L. )..
    Kloudbusters- Kansas..
    NAR # 87063
    Tripoli # 14443
    Level 3

  23. #23
    Join Date
    15th May 2009
    Location
    Northern Illinois Rocket Assembly and Test Facility (NIRATF)
    Posts
    1,907
    My first direct contact with Dr J was in 2010. I was at home, assembling a Cesaroni N3180 Red Lightning motor in Aerotech 98/15360 hardware (certified cross compatible). This configuration takes a special aft closure and a few other steps that were new to me, so I called CTI technical support, expecting a staffer with a "we'll get back to you". Jeroen answered the phone himself, fielded my questions, and then chatted a bit about the weather, who was expecting to fly at MWP that year, etc. Very pleasant conversation and an extremely personable man. I have had the good fortune of meeting him several times in person, he always remembers my name, and incredibly, my motor history. He listens to the community and has generated new products (N5600 WT, O3400 Imax, etc.) to meet our needs. Thank you, Dr J. We wish you a speedy and full recovery, and I hope we can give back to you whatever you need in the process.
    Proud member of WOOSH, FVR, IR, QCRS, (RC)2
    2013 APCP: 48,397.3 Ns (18% P)
    Highest altitude achieved: 21,981' AGL

    "Gravity is a cruel and unpredictable mistress"

  24. #24
    Join Date
    18th September 2011
    Location
    Malfunction Junction, Indiana
    Posts
    2,210
    CTI- Thank-you the updates here, it has been a very busy week for me with today being one of the first in awhile to respond...

    Jeroen is always in my thoughts- What a great community this is with all of the responses we've seen so far!
    Gustav Piepenburg. Chicago Rocket Mafia...aka "The Firestarter", Public Enemy Aerospace. Tripoli TAP.

  25. #25
    Join Date
    22nd February 2016
    Location
    Austin, TX
    Posts
    343
    Thank you for sharing that CTI.

    I have never personally met Jeroen or have done business with him, but from everyone here he sounds like a great guy. Get well soon Jeroen.
    Daniel Sadjadi

  26. #26
    Join Date
    6th June 2011
    Location
    San Diego. CA.
    Posts
    6,392
    While I'm not the biggest flyer punching holes in the stratosphere, Jeroen took the time to do some research and custom work for me a while back. I can't express my respect and thanks enough to him to bother with 'a little guy' like me. I can only offer my sympathy and support to him and his family during this dark time. DrJ-Just know you have legions of supporters out here wishing you a quick recovery with as little pain as possible.
    TRA 2383
    Somebody told me I was on the watch list-I hope I get a Rolex.....
    The road to Hell is paved....you're welcome.
    I can't remember the last rocket I built, because I haven't built it yet.....

  27. #27
    Join Date
    29th February 2016
    Location
    West Coast of Canada
    Posts
    62

    Cesaroni Technology Incorporated News and Well-Wishes thread

    Thoughts and prayers are with everyone at CTi - especially with Jeroen and his family.
    Last edited by midpower_madness; 3rd April 2016 at 07:31 PM.

  28. #28
    Join Date
    4th January 2011
    Location
    Alpine, Ca.
    Posts
    249
    Wishing Jerone a good recovery- I cant imagine what he is going through right now. He is the face of CTI as I have known it. Let him know we are all wishing for his recovery. Thanks for the update.
    L1 4k
    L2 13k
    L3 14,725 (waiver was 15,000 )

  29. #29
    Join Date
    4th January 2012
    Posts
    1,514
    Dr. J, I'm beaming all my heartfelt support and strength to the universe for your speedy recovery. Your dedication and contributions to this hobby are one of its cornerstones. Myself and the HPR community hold you and CTI in the very highest regard. I have never forgotten all the great data I derived from my very first v1 RDAS (I still have it), along with all the sims I've run in GDP, and the great collective of advice you've shared with me.

    It was great to finally meet up again in Potter last year.

    Click image for larger version. 

Name:	CJand DrJ.jpg 
Views:	236 
Size:	270.0 KB 
ID:	287082

    Stay strong and heal my friend.
    Jim Amos
    www.missileworks.com
    TRA 5715/NAR 24853

  30. #30
    Join Date
    9th December 2014
    Location
    San Diego
    Posts
    9
    I have had the pleasure of meeting Jeroen in person. We also email and talk on the phone occasionally. As others have stated, Jeroen truly is a wonderful person. He is kind, patient and considerate, as well as knowledgeable and he really enjoys his work, making it enjoyable for everyone around him.

    To Jeroen and his family; I and Gary P. as well as the rest of us at Aero Pack are very saddened and we have you in our thoughts and prayers and wish you the very best recovery. I will remain positive and look forward to our future conversations about rocketry.

    Thank you CTI for providing this conduit to Jeroen. I understand this is difficult for the entire CTI family and I wish you all well. You and Jereon have provided a great resource of high technology products and I know the hobby rocketry community is grateful.

    Sincerely,
    Bob Mosley


Similar Threads

  1. CTI Cesaroni Technology
    By GaryT in forum Vendor Display
    Replies: 1587
    Last Post: 24th February 2017, 03:28 AM
  2. Replies: 22
    Last Post: 1st April 2016, 01:40 PM
  3. How do you contact Cesaroni Technology Inc.?
    By mge55389 in forum High Power Rocketry (HPR)
    Replies: 7
    Last Post: 25th October 2005, 10:36 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •