Flash
Well-Known Member
- Joined
- Jan 22, 2009
- Messages
- 639
- Reaction score
- 48
I have a simple wired launch controller that I'm working on. I have a four launch system. For the power (+) to get there, you cut on a master toggle switch then another toggle switch to each pad that is going to be used. The 12V passes to main fire button for each pad then when pressed it goes to the pad. I want to wire in a master drag race button that will allow you to fire all rockets and the push of one button.
What I have in mind is hooking four separate wires to the relay out, then run each thru a diode then to each of the pad + wires so there want be any bleed over power between pads.
Any recommendations would be great! There is a lot more to the controller such as LEDS and Door Bell Chime, relay for master drag button, but I left it out to keep it simple. I need to hook one fire control button to four pads.
System is powered by 12V battery, it is not a relay launch system, it is built on the order of a Estes style controller, four in one with more safeties.
If the Diode idea is correct, then I need a recommendation on diodes to please.
What I have in mind is hooking four separate wires to the relay out, then run each thru a diode then to each of the pad + wires so there want be any bleed over power between pads.
Any recommendations would be great! There is a lot more to the controller such as LEDS and Door Bell Chime, relay for master drag button, but I left it out to keep it simple. I need to hook one fire control button to four pads.
System is powered by 12V battery, it is not a relay launch system, it is built on the order of a Estes style controller, four in one with more safeties.
If the Diode idea is correct, then I need a recommendation on diodes to please.