patelldp
Well-Known Member
- Joined
- Jan 23, 2009
- Messages
- 5,647
- Reaction score
- 101
If you're looking to give 29mm EX a try, here's your starter set! This set includes:
These motors use 2" long propellant grains with 5/16" cores. The motor uses BT-50H as a liner and BT-50 coupler as a casting tube and both are available from Balsa Machining.
Complete set is $135 shipped. Additional bulkheads are $15 each if you'd like to have a bulkhead for each motor. Thanks for looking!
- Three Motor cases - 2G (100 Ns, 6"), 3G (150 Ns, 8"), 4G (200 Ns, 10")
- Three graphite nozzles - #12, #15, #17
- One aluminum bulkhead, tapped for 10-24 eyebolt
- Three nozzle washers
- Three thrust rings
- Seven o-rings
- Six snap rings
These motors use 2" long propellant grains with 5/16" cores. The motor uses BT-50H as a liner and BT-50 coupler as a casting tube and both are available from Balsa Machining.
Complete set is $135 shipped. Additional bulkheads are $15 each if you'd like to have a bulkhead for each motor. Thanks for looking!
Last edited: