SMR
Entropy Demonstrator
- Joined
- May 15, 2009
- Messages
- 2,134
- Reaction score
- 171
I have managed to accumulate some duplicates and/or under-utilized hardware and one built kit, and now its time to pass them along to make room for a basement project. add $7 shipping (for the hardware) by priority mail, or free delivery / face-to-face handoff tri-state area (N Illinois, S Wisconsin, including Bong, Princeton, New Berlin sod field, or Hughes farm launches) for everything else. I will accept cash, personal check, or an I.O.U. from known individuals for all transactions. Everything listed was purchased new by me, all histories known and proper care/cleaning given. PM me and I'll hold them for you (in the order PM received).
Rouse Tech Hardware (Aerotech compatible / interchangeable):
(1) sold - Rouse Tech 38 / 240 hardware set / complete motor = (casing, aft closure, open forward closure). Flown 6 times, excellent condition. $50. ($96 retail)
(1) sold - Rouse Tech 38 / 360 hardware set / complete motor = (casing, aft closure, open forward closure). Flown 4 times, excellent condition. $55. ($99 retail)
(1) sold - Rouse Tech 38 / 600 hardware set / complete motor = (casing, aft closure, plugged forward closure, seal disk). Flown 5 times, excellent condition. $70. ($114 retail)
(1) sold - Rouse Tech 54 / 852 hardware set (casing, aft closure, open forward closure). Flown 3 times, excellent condition. $85. ($143 retail)
(1) sold - grab bag of forty assorted 38mm Aerotech RDK delay elements. $10 (local / hand delivery only)
(1) sold - grab bag of twenty-nine assorted 54mm Aerotech RDK delay elements. $10 (local / hand delivery only)
(1) Built 8.0 Gizmo XL DD fiberglass rocket. flown in the MWP X (2012) drag race and one time since, both with gentle full-chute recoveries. Buy as stand alone parts, or as a spare for your existing kit, or to fly. includes 25 x 3 fin motor section, avionics bay, 25 payload section, and 24.5 Ogive nose cone. Includes two avionics sleds with standoffs spaced for Stratologger 100s, 1515 rail buttons, stainless hardware (6 all-threads, 5 U-bolts), Kevlar recovery harness in motor section, and some very fine Stickershock graphics (Pink Floyd theme). $150 (local / hand delivery only)
Thanks for looking.
items sold in red font
available in black font
Rouse Tech Hardware (Aerotech compatible / interchangeable):
(1) sold - Rouse Tech 38 / 240 hardware set / complete motor = (casing, aft closure, open forward closure). Flown 6 times, excellent condition. $50. ($96 retail)
(1) sold - Rouse Tech 38 / 360 hardware set / complete motor = (casing, aft closure, open forward closure). Flown 4 times, excellent condition. $55. ($99 retail)
(1) sold - Rouse Tech 38 / 600 hardware set / complete motor = (casing, aft closure, plugged forward closure, seal disk). Flown 5 times, excellent condition. $70. ($114 retail)
(1) sold - Rouse Tech 54 / 852 hardware set (casing, aft closure, open forward closure). Flown 3 times, excellent condition. $85. ($143 retail)
(1) sold - grab bag of forty assorted 38mm Aerotech RDK delay elements. $10 (local / hand delivery only)
Includes three x RDK-09, two x RDK-11, twenty one x RDK-12, three x RDK-13, five x RDK-14, three x RDK-15, and three x RDK-17.
(1) sold - grab bag of twenty-nine assorted 54mm Aerotech RDK delay elements. $10 (local / hand delivery only)
Includes one x RDK-24, six x RDK-25, four x RDK-28, seven x RDK-31, and eleven x RDK-34.
(1) Built 8.0 Gizmo XL DD fiberglass rocket. flown in the MWP X (2012) drag race and one time since, both with gentle full-chute recoveries. Buy as stand alone parts, or as a spare for your existing kit, or to fly. includes 25 x 3 fin motor section, avionics bay, 25 payload section, and 24.5 Ogive nose cone. Includes two avionics sleds with standoffs spaced for Stratologger 100s, 1515 rail buttons, stainless hardware (6 all-threads, 5 U-bolts), Kevlar recovery harness in motor section, and some very fine Stickershock graphics (Pink Floyd theme). $150 (local / hand delivery only)
features = donut av bay has 6 stainless steel all-threads and 2 stainless U-bolts. Is set up for two sleds to fit all-threads with 1.25 centers. sleds (included) have standoffs for SL100 altimeters (not included)
= 25 payload bay.
= nose cone bulkhead glassed-in, includes stainless U-Bolt
= very fine graphics from Stickershock with Pink Floyd theme.
= holes in aft centering ring spaced for 98mm Aero Pack (not included).
= nose cone bulkhead glassed-in, includes stainless U-Bolt
= very fine graphics from Stickershock with Pink Floyd theme.
= holes in aft centering ring spaced for 98mm Aero Pack (not included).
has flown twice (N3000, M3400), using 3g at apogee and 6g for main.
will sell for $150 complete or $100 including motor section and av bay only, without payload body tube or nose cone. (They will fit my Formula 200 av bay, and I am particularly fond of the Pink Floyd Back Catalogue wrap by Stickershock).
will sell for $150 complete or $100 including motor section and av bay only, without payload body tube or nose cone. (They will fit my Formula 200 av bay, and I am particularly fond of the Pink Floyd Back Catalogue wrap by Stickershock).
Thanks for looking.
items sold in red font
available in black font
Last edited:
