Flash
Well-Known Member
- Joined
- Jan 22, 2009
- Messages
- 639
- Reaction score
- 48
I'm designing some 3" dia. size rockets with a 1.210" OD x 1.140" ID 29mm Motor tube inside a Mercury Engineering/ Balsa Machine Shop OD: 3.0000" x ID: 2.9300" Main Air-frame. Can I trust the auto Fin tab depth feature? Rocsim 9 says the tab depth should be .8950 for this setup.
The reason I ask is because I would hate to have cut or cut the fin tabs to short or the wrong size.
Thank you!
The reason I ask is because I would hate to have cut or cut the fin tabs to short or the wrong size.
Thank you!