Slickwilly
Well-Known Member
- Joined
- Nov 29, 2009
- Messages
- 619
- Reaction score
- 5
Cutting the fin slots:
1) Taping the fin slot guide to the body tube.
2) Poking holes at the corners of each slot.
3) Connecting pin holes and drawing the slots with straight edge.
4) Using fresh sharp knife blade to carefully cut out the slots.
5) Rough cut done.
6 and 7) Sanding slots for a good fit.
8) Looking good.
1) Taping the fin slot guide to the body tube.
2) Poking holes at the corners of each slot.
3) Connecting pin holes and drawing the slots with straight edge.
4) Using fresh sharp knife blade to carefully cut out the slots.
5) Rough cut done.
6 and 7) Sanding slots for a good fit.
8) Looking good.
