Hi guys- need a bit of help. I recently got a PS 2 controller on sale. I mostly launch Low Power, but have recently built an Argent and am building a Partizon, and would like to be able to launch them. Hence- after reading a bit I bought a LiPro battery to power the PS2 controller for the extra power to ignite the Aerotech motors.
Now my issue- I thought I read up and bought the correct thing, but the connector from the battery is about twice the size as the connection in the battery compartment of the PS2 controller.
Here is the battery I bought.
https://www.amazon.com/gp/product/B004UZD4Q8/?tag=skimlinks_replacement-20
Looking at the small connector (the big one is for charging or RC Cars- which I can still use it for if needed) it's got 4 wires going into it, and I'm guessing the pin in the controller accepts one with 2 wires? based on it's size.
Any help would be appreciated, or links to products or connectors that would make it work.
Thank You
(currently Bummed that we have lots of wind on the east coast, because I was going to be launching a bunch of LPR for my kids tomorrow. Blah.
Now my issue- I thought I read up and bought the correct thing, but the connector from the battery is about twice the size as the connection in the battery compartment of the PS2 controller.
Here is the battery I bought.
https://www.amazon.com/gp/product/B004UZD4Q8/?tag=skimlinks_replacement-20
Looking at the small connector (the big one is for charging or RC Cars- which I can still use it for if needed) it's got 4 wires going into it, and I'm guessing the pin in the controller accepts one with 2 wires? based on it's size.
Any help would be appreciated, or links to products or connectors that would make it work.
Thank You
(currently Bummed that we have lots of wind on the east coast, because I was going to be launching a bunch of LPR for my kids tomorrow. Blah.
Last edited by a moderator: