What you get when you cross Randy Rhoades's and Eddie Van halen's quitars with...

The Rocketry Forum

Help Support The Rocketry Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Scotty Dog

Well-Known Member
Joined
Mar 1, 2010
Messages
7,451
Reaction score
302
....Cheap Trick's Rick Nielsen's checkerboard quitar?


Oh..ha ha....you'll have to....

.............WAIT FOR IT!!!!!!!!!!

clue its a Fliskit bash

Pics to come.
 
Last edited:
ok its a Fliskit "Rock Star" with a twist or 2.

Thinking mirror pigment..white wing,black dots/black wing,white dots..ect
A little eddie v black masked stripes and maybe b&w checkered NC.

Still needs some more sanding on some areas.
Payload..??????
Wing end pods will be used and will have short pointy BNCs.
Upper section starts at bottom of the clear payload tube.
Red film is .002 shim-stock.

DSCN3117.JPG

DSCN3113.JPG

DSCN3115.JPG

DSCN3116.JPG

DSCN3124.JPG

DSCN3118.JPG

18569_EVH_Art_Series_Black_White_0984_1.jpg

bw quitar.jpg

bw quitars.jpg
 
Last edited:
I for one, am glad you're back posting again. There was little for me to weigh in on since you've been away.
 
Well, looks like the humidity is going to drop next few afternoons..maybe I can get some pigment on this bird.
 
Wow, its been 7-8 months!
Finally got the white pigment on this bird.
Used ACE quick dry lacquer .
I almost messed it up. I didn't do a test spray and when I started to apply the pigment it came out real course. But it laid down in the end.
So, I'll let it set a few days ( hopefully not months) and start masking off for the black pigment.
It actually looks better today. Pigment laid down real nice!

DSCN3658.JPG

DSCN3659.JPG

DSCN3660.JPG
 
Back
Top