cost of CTI O8000 and O3400 motors

What is the average retail cost of a CTI O3400 and a CTI O8000?

Reload 2800-3100 and with the casing 5800 to 7000 total.

Pro150 reloads cost ~$1100 per grain. The O8000 reload is on sale from AMWPROX for $3100. Case rental is $2000. Shipping is about $3.00 per mile.

Bob

bobkrech said:

Pro150 reloads cost ~$1100 per grain. The O8000 reload is on sale from AMWPROX for $3100. Case rental is $2000. Shipping is about $3.00 per mile.

Bob

Click to expand...

Shipping sounds awful high, even with it being a HazMat item, and truck freight too. Then again I have been away from the freight biz for a couple of years, and it may have jumped that dramatically.

bobkrech said:

Case rental is $2000. Shipping is about $3.00 per mile.

Click to expand...

Case rental is $200 (not $2000).

Jeroen

rharshberger said:

Shipping sounds awful high, even with it being a HazMat item, and truck freight too.

Click to expand...

1.3C has to go in a dedicated truck with a tandem driver team. $3/mile is correct.

The O3400 motor is significantly cheaper. $1149 MSRP, if I recall correctly.

Jeroen

Jeroen, at which facility are the motors made? I know you have facilities near Toronto and Florida, right?

Jeroen_at_CTI said:

Case rental is $200 (not $2000).

Jeroen

Click to expand...

That's a bargain for the case rental as the last retail price I saw was $4800 for the Pro150-4G hardware.

Bob

Azizi said:

What is the average retail cost of a CTI O3400 and a CTI O8000?

Click to expand...

where are you located?

The O3400 is a 6xl 98mm. It can be had for ~$1200 and the case can be had for $450 (case only) or complete setup for $630. Below are links to my local supplier's website for the reload and case. I assume the reload is not normally stocked, and not sure if there are extra charges for shipping.

https://www.offwegorocketry.com/index.php?cPath=23_25_88_131
https://www.offwegorocketry.com/index.php?cPath=80_93_100