New to dual altimeter setups and it was suggested to add a 1 second delay to my backup altimeter apogee event. I thought I would post this thread and see what others are doing as well.
If it matters there are two rockets I will be launching with this config.
One I have already launched twice with a 1 sec delay but the main worked fine so the delay was never tested. It is a 54mm min diameter rocket that I will be launching to 17K @ Mach 1.1
The other is new and a 3 build that will hit 14K @ Mach 1.3
If there is anything else that I should take into consideration please let me know. It would be good to know if the delay should change based on the flight profile?
If it matters there are two rockets I will be launching with this config.
One I have already launched twice with a 1 sec delay but the main worked fine so the delay was never tested. It is a 54mm min diameter rocket that I will be launching to 17K @ Mach 1.1
The other is new and a 3 build that will hit 14K @ Mach 1.3
If there is anything else that I should take into consideration please let me know. It would be good to know if the delay should change based on the flight profile?