- Joined
- Feb 15, 2012
- Messages
- 1,334
- Reaction score
- 142
The goals for this EZI-65 build are simple - win a contest (work sponsored event) of who can launch the highest dual deploy 4" rocket using a CTI I242W motor.
With that goal, I selected the EZI-65 kit and will be making the following mods:
1. Addition of an Aeropack tail cone to reduce base drag.
2. Addition of a LOC Precision avionics bay.
3. Adding a 15" payload section (stock is 10").
4. Shortening main body tube ~4" to avoid adding length due to longer payload section.
5. Replaced blunt nose cone with 4:1 ogive cone from binder design.
Any suggestions are welcome!
With that goal, I selected the EZI-65 kit and will be making the following mods:
1. Addition of an Aeropack tail cone to reduce base drag.
2. Addition of a LOC Precision avionics bay.
3. Adding a 15" payload section (stock is 10").
4. Shortening main body tube ~4" to avoid adding length due to longer payload section.
5. Replaced blunt nose cone with 4:1 ogive cone from binder design.
Any suggestions are welcome!
Last edited: