waywayanda
Well-Known Member
- Joined
- Feb 10, 2010
- Messages
- 119
- Reaction score
- 0
Dog House Rocketry has updated our website with a few new offerings.
1) Based on an excellent suggestion from TRF member "woferry" we have developed a Thru-Bulkhead Terminal as another option to save room on your avionics bay bulkhead. It follows the same concept as our popular space-saving combined Charge Well/Terminals, but provides just the terminal block that you can use with your favorite charge wells. These are nearly half the size of a typical terminal strip.
NOTE: As with the Charge Well/Term products the screws must be protected from shorting against metal parts. We recommend protecting the exposed metal screws with electrical tape to prevent inadvertent contact with Quick Links, swivels, etc. These can be used with metal bulkheads using our screw isolators.
2) We finally found a nice alternative to the small format 4-40 has nuts used in our Charge Well/Terminals and the new Terminals above. It is a small brass knurled nut that is much easier to tighten without tools. As with the Note above, please wrap the exposed metal screws with electrical tape to prevent shorting.
3) We now have available for purchase the small Ring Lugs used in our Charge Well/Terminals and the new Terminals above
Thanks for your business.
1) Based on an excellent suggestion from TRF member "woferry" we have developed a Thru-Bulkhead Terminal as another option to save room on your avionics bay bulkhead. It follows the same concept as our popular space-saving combined Charge Well/Terminals, but provides just the terminal block that you can use with your favorite charge wells. These are nearly half the size of a typical terminal strip.
NOTE: As with the Charge Well/Term products the screws must be protected from shorting against metal parts. We recommend protecting the exposed metal screws with electrical tape to prevent inadvertent contact with Quick Links, swivels, etc. These can be used with metal bulkheads using our screw isolators.
2) We finally found a nice alternative to the small format 4-40 has nuts used in our Charge Well/Terminals and the new Terminals above. It is a small brass knurled nut that is much easier to tighten without tools. As with the Note above, please wrap the exposed metal screws with electrical tape to prevent shorting.
3) We now have available for purchase the small Ring Lugs used in our Charge Well/Terminals and the new Terminals above
Thanks for your business.