Joker050608
Well-Known Member
- Joined
- Jul 21, 2013
- Messages
- 449
- Reaction score
- 0
So I figured today would be a perfect day to get my first fiberglass kit together. Since we're on shut down at work and there's about 8" of snow on the ground lets get things started.
All the parts out of the box, washed up, and ready to go.
I like to start with the little bits first.
Added an eyebolt to the nose cone bulkhead. Simple yet effective. After fitting it in the nose cone with minimal sanding I set them aside to work on the motor mount.
Here I used a diamond file to notch out a little section to slide my shock cord through.
Before
After
Tacked on the shock cord and started epoxying all the fitted pieces together.
All the parts out of the box, washed up, and ready to go.
I like to start with the little bits first.
Added an eyebolt to the nose cone bulkhead. Simple yet effective. After fitting it in the nose cone with minimal sanding I set them aside to work on the motor mount.
Here I used a diamond file to notch out a little section to slide my shock cord through.
Before
After
Tacked on the shock cord and started epoxying all the fitted pieces together.