- Joined
- Jan 19, 2009
- Messages
- 2,693
- Reaction score
- 308
When I use rocksim and open the database, any airframe size I select shows as 24mm stuff with 29mm dimensions.
Any ideas?
Any ideas?
Rocksim 9
- Thread starter tbonerocketeer
- Start date
Help Support The Rocketry Forum:
JDcluster
Well-Known Member
I don't know why but, it has happened to mine.
Where your selected tube is somehow undersized.
When you use it as a MM it won't allow you to load the motors properly.
My only solution was to input the correct info then, save it to the database.
JD
Where your selected tube is somehow undersized.
When you use it as a MM it won't allow you to load the motors properly.
My only solution was to input the correct info then, save it to the database.
JD
- Joined
- Jan 19, 2009
- Messages
- 2,693
- Reaction score
- 308
I also have nan showing for margin and cg....ideas?
- Joined
- Jan 11, 2013
- Messages
- 6,450
- Reaction score
- 961
Chris,,
If you double clicked and selected that 3" X 60" airframe
then that's what it should be showing...
Somethings wrong there...
How bout you call Apogee and ask .....
You'll surely get great help from them....
Teddy
If you double clicked and selected that 3" X 60" airframe
then that's what it should be showing...
Somethings wrong there...
How bout you call Apogee and ask .....
You'll surely get great help from them....
Teddy
Similar threads
