- Joined
- Mar 27, 2013
- Messages
- 22,537
- Reaction score
- 14,953
[EDIT] I've asked Admin to move this thread out of the Wanted section, as it has evolved from the original request into a documentation of the creation of the CinerocDV. I've also renamed the thread.
[EDIT] The original .ork files were based on Mike Jerauld's dimensional drawing. Reading further you'll see that after noticing several discrepancies with it, I measured the parts again and updated the dimensional drawing and files.[/EDIT]
I've not had anybody be able to come through with a bid on this... I'm looking for someone who can print two reproductions of the Cineroc nosecone, and one copy each of the transition and the "keyed bulkhead". I don't need the camera's body, nor the mirror's shroud.
The transition (seen below) needs a notch taken out of it (which I simulated in red). The black rings inside it and on the bulkhead are actually holes for screws to connect the bulkhead to the transition (but are optional). The black object seen inside the transition is reinforcement to prevent a hard landing from cracking the bottom of the transition.
If you're interested, please PM me, and we can talk more about this.
[EDIT] The original .ork files were based on Mike Jerauld's dimensional drawing. Reading further you'll see that after noticing several discrepancies with it, I measured the parts again and updated the dimensional drawing and files.[/EDIT]
I've not had anybody be able to come through with a bid on this... I'm looking for someone who can print two reproductions of the Cineroc nosecone, and one copy each of the transition and the "keyed bulkhead". I don't need the camera's body, nor the mirror's shroud.
The transition (seen below) needs a notch taken out of it (which I simulated in red). The black rings inside it and on the bulkhead are actually holes for screws to connect the bulkhead to the transition (but are optional). The black object seen inside the transition is reinforcement to prevent a hard landing from cracking the bottom of the transition.
If you're interested, please PM me, and we can talk more about this.
Last edited: