Phoenix1583
Active Member
- Joined
- Jul 10, 2014
- Messages
- 40
- Reaction score
- 0
Hey folks.
I'm building the Astrobee-D scale HPR that I've been wanting to do for a while now. Using all bluetube for the body and motor mount. I'm using fins from the Aerotech kit to preserve the detail that they've got.
I've been getting the parts over the last few weeks a little bit at a time and I'm now got everything I need to get building. I'm new to this so any feedback is most welcome. (and before you mention it, yes, I know CO2 is excessive. :neener: )
Anyway, the images below are the basic design on openrocket (all parts have been massed and are represented in the design file.) The rocket will stand at 68.2" with a diameter of 2.68" and ~4.9lbs in total loaded. Additionally, the engine will not have an ejection charge in it and the bottom boost section is sealed with the chute coming from the payload section.
I'm building the Astrobee-D scale HPR that I've been wanting to do for a while now. Using all bluetube for the body and motor mount. I'm using fins from the Aerotech kit to preserve the detail that they've got.
I've been getting the parts over the last few weeks a little bit at a time and I'm now got everything I need to get building. I'm new to this so any feedback is most welcome. (and before you mention it, yes, I know CO2 is excessive. :neener: )
Anyway, the images below are the basic design on openrocket (all parts have been massed and are represented in the design file.) The rocket will stand at 68.2" with a diameter of 2.68" and ~4.9lbs in total loaded. Additionally, the engine will not have an ejection charge in it and the bottom boost section is sealed with the chute coming from the payload section.